Recent Development in ITO-free Flexible Polymer Solar Cells
نویسندگان
چکیده
Polymer solar cells have shown good prospect for development due to their advantages of low-cost, light-weight, solution processable fabrication, and mechanical flexibility. Their compatibility with the industrial roll-to-roll manufacturing process makes it superior to other kind of solar cells. Normally, indium tin oxide (ITO) is adopted as the transparent electrode in polymer solar cells, which combines good conductivity and transparency. However, some intrinsic weaknesses of ITO restrict its large scale applications in the future, including a high fabrication price using high temperature vacuum deposition method, scarcity of indium, brittleness and scaling up of resistance with the increase of area. Some substitutes to ITO have emerged in recent years, which can be used in flexible polymer solar cells. This article provides the review on recent progress using other transparent electrodes, including carbon nanotubes, graphene, metal nanowires and nanogrids, conductive polymer, and some other electrodes. Device stability is also discussed briefly.
منابع مشابه
Influence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells
A commercial Ti-Nanoxide was deposited on In-doped SnO2 (ITO) polymer substrates by tape casting technique with different thicknesses (7, 14 and 36μm) to be used as photoelectrode in flexible dye-sensitized solar cells (DSSCs). Ruthenium dye was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...
متن کاملAn indium tin oxide-free polymer solar cell on flexible glass.
Future optoelectronic devices and their low-cost roll-to-roll production require mechanically flexible transparent electrodes (TEs) and substrate materials. Indium tin oxide (ITO) is the most widely used TE because of its high optical transmission and low electrical sheet resistance. However, ITO, besides being expensive, has very poor performance under mechanical stress because of its fragile ...
متن کاملSolution-processed flexible polymer solar cells with silver nanowire electrodes.
The conventional anode for organic photovoltaics (OPVs), indium tin oxide (ITO), is expensive and brittle, and thus is not suitable for use in roll-to-roll manufacturing of OPVs. In this study, fully solution-processed polymer bulk heterojunction (BHJ) solar cells with anodes made from silver nanowires (Ag NWs) have been successfully fabricated with a configuration of Ag NWs/poly(3,4-ethylenedi...
متن کاملA cracked polymer templated metal network as a transparent conducting electrode for ITO-free organic solar cells.
We report a highly transparent, low resistance Ag metal network templated by a cracked polymer thin film and its incorporation in an organic solar cell. The performance of this scalable metallic network is comparable to that of conventional ITO electrodes. This is a general approach to replace ITO in diverse thin film devices.
متن کاملEffect of Sheet Resistance andMorphology of ITO Thin Films on Polymer Solar Cell Characteristics
Solar cell fabrication on flexible thin plastic sheets needs deposition of transparent conducting anode layers at low temperatures. ITO thin films are deposited on glass by RF sputtering at substrate temperature of 70◦C and compare their phase, morphology, optical, and electrical properties with commercial ITO. The films contain smaller nanocrystallites in (222) preferred orientation and exhibi...
متن کامل