Flexible Circuit Technologies for Biomedical Applications
نویسندگان
چکیده
منابع مشابه
Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications
This article presents an overview on typical properties, technologies, and applications of liquid metal based flexible printed electronics. The core manufacturing material—room-temperature liquid metal, currently mainly represented by gallium and its alloys with the properties of excellent resistivity, enormous bendability, low adhesion, and large surface tension, was focused on in particular. ...
متن کاملProgress in Research of Flexible MEMS Microelectrodes for Neural Interface
With the rapid development of Micro-electro-mechanical Systems (MEMS) fabrication technologies, many microelectrodes with various structures and functions have been designed and fabricated for applications in biomedical research, diagnosis and treatment through electrical stimulation and electrophysiological signal recording. The flexible MEMS microelectrodes exhibit excellent characteristics i...
متن کاملYaqub, Imran and Li, Jianfeng and Johnson, Christopher Mark (2015) Dependence of overcurrent failure modes
Insulated gate bipolar transistor (IGBT) modules which can fail to short circuit mode have great of applications in electricity network related fields. Single IGBT samples have been constructed with the standard Al wire bonding, flexible printed circuit board (PCB) interconnect and sandwich structure technologies. The overcurrent failure modes of the constructed IGBT samples have been tested un...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملFlip chip microassembly of a silicon triaxial force sensor on flexible substrates
Miniaturization of microelectromechanical systems (MEMS) based devices can be achieved by flip chip assembly directly onto a flexible circuit substrate. The main goal of this work was the selection of a suitable bonding material and process to enable scaling down of MEMS sensorized devices for biomedical applications. Finally, the heat bondable anisotropic conductive film 5552R (3M) allowed mec...
متن کامل