Mechanical and biological consequences of repetitive loading: crack initiation and fatigue failure in the red macroalga Mazzaella.

نویسنده

  • Katharine J Mach
چکیده

On rocky shores, wave-swept macroalgae experience dramatic and repeated wave-induced hydrodynamic forces. However, previous studies of macroalgal mechanics have shown that individual waves are not forceful enough to account for observed rates of breakage. Instead, fatigue may contribute to algal breakage, with damage accumulating over time in conditions of repeated loading. Here I examine the entire process of fatigue, from crack initiation to eventual specimen fracture, in the common red alga Mazzaella. Propensity for fatigue failure in laboratory tests varied with life history phase and species: at a given repeated loading stress, male gametophytes endured more loading cycles before breakage than tetrasporophytes, which in turn lasted longer than female gametophytes; likewise, M. splendens withstood more loading cycles at a given repeated loading stress than M. flaccida. Fatigue failure begins with formation of cracks, the timing and location of which were assessed. Cracks formed, on average, after approximately 80-90% of cycles required for failure had passed, although crack timing varied with life history phase. Also, crack formation frequently occurred in association with endophytes and female gametophyte reproductive structures, suggesting a cost of endophyte infection and a tradeoff between reproduction and mechanical survival. Comparison between laboratory and field loading conditions provides robust confirmation that fatigue breaks fronds in natural M. flaccida populations. Large, female gametophyte fronds are predicted to be most susceptible to fatigue failure in the field, whereas small, male gametophyte fronds are least likely to break.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes

In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...

متن کامل

Effect of Boundary Condition on Pre-Existing Crack Under Fatigue Loading

In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...

متن کامل

Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading

In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...

متن کامل

An Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade

First row rotating blades of four axial-flow compressors were prematurely fractured. Previous investigations showed that the site atmosphere contains corrosive compounds which lead to an increase in possibility of pitting on the blades. It was also revealed that the crack was originated from two corrosion pits. Thus, this work is conducted to ascertain which of fatigue or stress corrosion crack...

متن کامل

Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method

This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of experimental biology

دوره 212 Pt 7  شماره 

صفحات  -

تاریخ انتشار 2009