Simulation of Climbing Robots using Underpressure for Adhesion
نویسندگان
چکیده
منابع مشابه
Wall Climbing Robot Using Electrostatic Adhesion Force Generated by Flexible Interdigital Electrodes
Electrostatic adhesion technology has broad application prospects on wall climbing robots because of its unique characteristics compared with other types of adhesion technologies. A double tracked wall climbing robot based on electrostatic adhesion technology is presented including electrode panel design, mechanical structure design, power supply system design a...
متن کاملMagnetic wheels optimization and application to the MagneBike climbing robot
Magnetic wheels are a powerful solution to design inspection climbing robots with excellent mobility. Magnetic wheels optimization based on simulations and the results that were obtained on prototypes are presented. The measured adhesion was doubled between the classic configuration and a novel multilayer one sharing exactly the same four magnets and the same total volume of iron. This know-how...
متن کاملRisk Prediction of a Behavior-based Adhesion Control Network for Online Safety Analysis of Wall-climbing Robots
Risk analysis in combination with terrain classification is a common approach in mobile robotics to adapt robot control to surface conditions. But for climbing robots it is hard to specify, how the robotic system and especially the adhesion is affected by different surfaces and environmental features. This paper will introduce the climbing robot CROMSCI using negative pressure adhesion via mult...
متن کاملNew Technologies for Climbing Robots Adhesion to Surfaces ?
The interest in the development of climbing robots is growing steadily. The main motivations are to increase the operation efficiency, by eliminating the costly assembly of scaffolding, or to protect human health and safety in hazardous tasks. Climbing robots have already been developed for applications ranging from cleaning to inspection of constructions difficult to reach. These robots should...
متن کاملWall Climbing Robots with Track-wheel Mechanism
This paper presents a family of climbing robots that are using a track-wheel mechanism for locomotion mechanism. There are three robots: High speed vertical climbing robot, Flexible caterpillar robot, and Multi-linked climbing robot. The high speed vertical climbing robot uses suction pads to be attached on walls, and the robot has an advantage of high climbing speed of 14 m/min. The flexible c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004