Electrochemical Investigation of the Ternary Phase Diagram Lithium-Indium-Antimony at 400 °C

Study of Transition Metal Phosphides as Anode Materials for Lithium-ion Batteries: Phase Transitions and the Role of the Anionic Network

This study highlights the importance of the anion in the electrochemical uptake of lithium by metal phosphides. It is shown through a variety of in-situ and ex-situ analytical techniques that the redox active centers in three different systems (MnP4, FeP2, and CoP3) are not necessarily cationic but can rest almost entirely upon the anionic network, thanks to the high degree of covalency of the ...

Ternary Phase Diagram Modeling of Chiral Medetomidine Salts Using NRTL-SAC Model

Experimental determination of solubility and ternary phase diagram of chiral compound are of tedious and time consuming tasks, and in many cases, there is not enough experimental data for different enantiomeric compositions to access the experimental ternary phase diagram. Using thermodynamic models with predictive capability, having less dependency on experimental data, affords a great advanta...

ternary phase diagram for polymer/ solvent/ supercritical-CO2by sanchez-lacombe model

Phase Equilibria of the Ternary System Water + Phosphoric Acid + 1-Nonanol at Different Temperatures

The purpose of this reaserch is to measure the phase equilibrium data of the ternary system (water + phosphoric acid + 1-nonanol) at different temperatures. Experimental solubility curves and tie-line points for the system were obtained at T = 298.2, 308.2 and 318.2 K and ambient pressure. The binodal curve data were detected by the cloud point method. The mass fractions of each layer ...

Experimental investigation on synthesis of merlinoite and gismondine zeolites by lithium alkaline solution under hydrothermal condition

This research was carried out to study hydrothermal synthesis of merlinoite and gismondine zeolites from perlite, as the raw material for the production of essential silica and aluminum, under alkaline condition, at a constant temperature of 150˚C during 3 days. All experiments were performed on the same sample of perlite powder without any purification and all reactions were carried out into t...