Nanoporous, hypercrosslinked polypyrroles: effect of crosslinking moiety on pore size and selective gas adsorption.
نویسندگان
چکیده
Nanoporous, hypercrosslinked polypyrroles with surface areas of up to 720 m2 g(-1) have been prepared; their pore sizes and gas adsorption selectivities were controlled by varying the size of the crosslinking units.
منابع مشابه
Synthesis, Characterization and Catalytic Activity of a New Chromium Catalyst Supported on Nanoporous MCM-41 for Oxidation of Olefins and Alkyl Aromatics
The mesoporous molecular sieve MCM-41 was covalently grafted with 3-chloropropyl trimethoxylsilane and then was reacted with [Cr(salpr)(H2O)]Cl, (salpr = N,N'-bis(3-salicylidenaminopropyl)amine) to afford MCM-41 containing Cr(salpr) moiety, Cr(salpr)MCM-41. Powder X-ray diffraction and nitrogen adsorption-desorption analyses revealed that not only the textural characteristics of the support wer...
متن کاملApplication of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System
Hydrothermal and non-hydrothermal spherical TiO2 nanoporous with crystalline framework were prepared by sol-gel method. The Crystalline structures, morphologies and surface texturing of materials were determined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and N2 adsorption-desorption isotherms. The Hydrothermal spherical TiO2 nanoporous was found to have a narrow and strong p...
متن کاملSynthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media
The mesoporous carbon (CMK-3) functionalized with ethylenediamine (EDA) has been synthesized (CMK-3-EDA) and applied as a new mesoporous adsorbent for removal of Cu(II) and Pb(II) cations from aqueous solutions. Nitrogen adsorption–desorption measurements (BET) show that surface area, pore size and pore volume of CMK-3 were significantly changed after amine modification. The BET surface area an...
متن کاملEffect of Nanoporous Anodic Aluminum Oxide (AAO) Characteristics On Solar Absorptivity
Nanoporous anodic aluminum oxide (AAO) has been used in many different fields of science and technology, due to its great structural characteristics. Solar selective surface is an important application of this type porous material. This paper investigates the effect of nanoporous AAO properties, including; film thickness, pore area percentage and pore diameter, on absorption spectra in the rang...
متن کاملSynthesis of Nanoporous Metal Organic Framework MIL-53-Cu and Its Application for Gas Separation
MIL-53-Cu has been synthesized hydrothermally and has been used for the first time for gas separation. MIL-53-Cu shows adsorption capacities of 8.1, 0.7 and 0.5 m.mol/g, respectively, for CH4, CO2 and H2 at 30 bar and 298 K. The high CH4 adsorption capacity of MIL-53-Cu maybe attributed to the high pore volume and large number of open metal sites....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 12 شماره
صفحات -
تاریخ انتشار 2009