OXYGEN AND NITROGEN UPTAKE IN Ni-Cr ALLOYS
نویسندگان
چکیده
Oxygen and nitrogen introduced in three Ni-Cr alloy castings were significantly varied according to both different alloys and different melting methods. The arc melting in Ar blow caused significant increases in the amounts of oxygen and nitrogen uptake, which were influenced by alloy composition. The severe gas absorption by the arc melting in Ar blow resulted in the marked occurrence of porosity in the castings of the alloy containing lesser amounts of Cr, Si and/or Mn. No significant variations in hardness of the castings were found due to the differences in melting methods.
منابع مشابه
Oxidation – Nitridation of Ni-Cr-Al Alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...
متن کاملSynthesis and Characterization of Mixed Ligand Complexes of Transition Metals with Schiff’s Bases
The mixed ligand complexes of the type [ML1L2]Cl2. Where M=Cr(III), Mn(II), Co(II), Ni(II) and Cu(II) and L1=Pyruvic acid semicarbazone L2= Benzaldehyde semicarbazone have been synthesized, by the reactions of metal chlorides with two different semicarbazones in 1:1:1 molar ratios. The resulting products have been characterized on the basis of elemental analysis, magnetic measurement, IR and El...
متن کاملControllably Alloyed, Low Density, Free-standing Ni-Co and Ni-Graphene Sponges for Electrocatalytic Water Splitting
Synthesis of low cost, durable and efficient electrocatalysts that support oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are the bottlenecks in water electrolysis. Here we propose a strategy for the development of controllably alloyed, porous, and low density nickel (Ni) and cobalt (Co) based alloys - whose electrocatalytic properties can be tuned to make them multifunct...
متن کاملSolvent extraction and separation of hafnium from zirconium using Ionquest
industries, its nuclear properties in the pure metallic form make it highly desirable for nuclear applications. Zr is highly corrosion resistant and has a high melting point (2128 K) with a low thermal neutron absorption cross-section of Zr T = 0.18 b, which is significantly smaller than that of hafnium Hf T =115 b) (Speer, 1982), an element that coexists with Zr in nature. This makes Zr ideal ...
متن کاملImproved Accident Tolerance of Austenitic Stainless Steel Cladding through Colossal Supersaturation with Interstitial Solutes
Presently, LWR (light-water reactor) fuel cladding (tube) is made from Zr-base alloys (e.g., Zircaloy). However, in steam at temperatures above 1000 K (727 °C), these alloys oxidize rapidly, stripping oxygen from water molecules and producing hydrogen, which may cause explosion. Moreover, Zr-base alloys are prone to GTRF (“grid-to-rod” fretting) failure, in which flowinduced vibration of fuel r...
متن کامل