Transverse Vibration Control for Cable Stayed Bridge Under Construction Using Active Mass Damper
نویسندگان
چکیده
منابع مشابه
Semi-active control of a cable-stayed bridge under multiple-support excitations.
This paper presents a semi-active strategy for seismic protection of a benchmark cable-stayed bridge with consideration of multiple-support excitations. In this control strategy, Magnetorheological (MR) dampers are proposed as control devices, a LQG-clipped-optimal control algorithm is employed. An active control strategy, shown in previous researches to perform well at controlling the benchmar...
متن کاملSemiactive Damping of Stay Cables Neglecting Sag S Emiactive D Amping of S Tay C Ables N Eglecting S Ag
A BSTRACT : Stay cables, such as are used in cable-stayed bridges, are prone to vibration due to their low inherent damping characteristics. Transversely-attached passive viscous dampers have been implemented in many bridges to dampen such vibration. Several studies have investigated optimal passive linear viscous dampers; however, even the optimal passive device can only add a small amount of ...
متن کاملM ODELING AND S EMIACTIVE D AMPING OF S TAY C ABLES Greg
Long cables, such as are used in cable-stayed bridges, are prone to vibration due to their low inherent damping characteristics. Several studies have investigated the use of an optimal viscous damper attached transversely to dampen such vibration. This paper investigates the potential for improved damping using a semiactive device. The equations of motion of the cable/damper system are reviewed...
متن کاملFeasibility Study of the Electromagnetic Damper for Cable Structures Using Real-Time Hybrid Simulation
Cable structure is a major component of long-span bridges, such as cable-stayed and suspension bridges, and it transfers the main loads of bridges to the pylons. As these cable structures are exposed to continuous external loads, such as vehicle and wind loads, vibration control and continuous monitoring of the cable are required. In this study, an electromagnetic (EM) damper was designed and f...
متن کاملA new energy-based method for evaluating the damping properties of cable-damper systems
External dampers and cross-ties are commonly used to control vibrations of stay cables on cable-stayed bridges. While dampers contribute directly to the structural damping of the attached cables, cross-ties mainly help to increase the stiffness of the connected cable system. The idea of incorporating cross-ties with dampers has also been attempted in a few recent applications to benefit from th...
متن کامل