GP 4 - Modeling and experimental investigation of the microstructural changes in the interdiffusion zone of leadfree solder joints Participants

نویسنده

  • N. Moelans
چکیده

Participants N. Moelans 1, J. Botsis2, R. Čička3, J. Cugnoni2, A. Durga1, M. Danielewski4, J. Drápala5, M. Drienovský3, Y. Guan1, P. Harcuba5, J. Janczak-Rusch4, J. Janovec3, A.A. Kodentsov6, A. Kroupa7, P. Kubíček5, A. Kudyba8,9, M. Maleki2, M. Martinkovič3, R. Novakovic10, R. Nowak8,9 M. Ožvold3, M. Pawelkiewicz4, K. Pietrzak8,9, K Pocisková Dimová3, L. Rízeková Trnková3, M. Scheller4, E. Sienicki8,9, N. Sobczak8,9, K.K. Sosnowska4, G. Toporek4, V. Vodárek5, A. Zemanová7, P. Zolliker4 1 KU Leuven, Department of Metallurgy and Materials Engineering, Belgium 2 LMAF-EPFL-Lausanne, The Switzerland 3 Slovak University of Technology, Faculty of Materials Science and Technology, Trnava, Slovakia 4 Empa, Swiss Federal Laboratories for Materials Science and Technology

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effect of bonding temperature on the characteristics of TLP bonded joints in AISI 2205/BNi-3/AISI 2205 assembly

In the present study, the transient liquid phase bonding of AISI 2205 dual phase stainless steel with amorphous BNi-3 interlayer was carried out. Based on the initial experimental and analytical studies, the parameters of temperature and bonding time were determined. In order to investigate the effect of bonding temperature on the microstructural changes of the joint, bonding was performed in t...

متن کامل

The effect of bonding temperature on the characteristics of TLP bonded joints in AISI 2205/BNi-3/AISI 2205 assembly

In the present study, the transient liquid phase bonding of AISI 2205 dual phase stainless steel with amorphous BNi-3 interlayer was carried out. Based on the initial experimental and analytical studies, the parameters of temperature and bonding time were determined. In order to investigate the effect of bonding temperature on the microstructural changes of the joint, bonding was performed in t...

متن کامل

Investigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process

The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...

متن کامل

Investigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process

The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...

متن کامل

Lead Free Solder Joint Reliability Estimation by Finite Element Modelling Advantages, Challenges and Limitations

Finite element modelling (FEM) has been widely used for the estimation of the lifetime of solder joints subjected to temperature cycling. Thanks to the expertise of decades, a significant number of companies, universities and research institutes were able to have a relatively accurate estimation of life time for SnPb solder. For the leadfree solder materials, first attempts for correlation mode...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013