GP 4 - Modeling and experimental investigation of the microstructural changes in the interdiffusion zone of leadfree solder joints Participants
نویسنده
چکیده
Participants N. Moelans 1, J. Botsis2, R. Čička3, J. Cugnoni2, A. Durga1, M. Danielewski4, J. Drápala5, M. Drienovský3, Y. Guan1, P. Harcuba5, J. Janczak-Rusch4, J. Janovec3, A.A. Kodentsov6, A. Kroupa7, P. Kubíček5, A. Kudyba8,9, M. Maleki2, M. Martinkovič3, R. Novakovic10, R. Nowak8,9 M. Ožvold3, M. Pawelkiewicz4, K. Pietrzak8,9, K Pocisková Dimová3, L. Rízeková Trnková3, M. Scheller4, E. Sienicki8,9, N. Sobczak8,9, K.K. Sosnowska4, G. Toporek4, V. Vodárek5, A. Zemanová7, P. Zolliker4 1 KU Leuven, Department of Metallurgy and Materials Engineering, Belgium 2 LMAF-EPFL-Lausanne, The Switzerland 3 Slovak University of Technology, Faculty of Materials Science and Technology, Trnava, Slovakia 4 Empa, Swiss Federal Laboratories for Materials Science and Technology
منابع مشابه
The effect of bonding temperature on the characteristics of TLP bonded joints in AISI 2205/BNi-3/AISI 2205 assembly
In the present study, the transient liquid phase bonding of AISI 2205 dual phase stainless steel with amorphous BNi-3 interlayer was carried out. Based on the initial experimental and analytical studies, the parameters of temperature and bonding time were determined. In order to investigate the effect of bonding temperature on the microstructural changes of the joint, bonding was performed in t...
متن کاملThe effect of bonding temperature on the characteristics of TLP bonded joints in AISI 2205/BNi-3/AISI 2205 assembly
In the present study, the transient liquid phase bonding of AISI 2205 dual phase stainless steel with amorphous BNi-3 interlayer was carried out. Based on the initial experimental and analytical studies, the parameters of temperature and bonding time were determined. In order to investigate the effect of bonding temperature on the microstructural changes of the joint, bonding was performed in t...
متن کاملInvestigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process
The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...
متن کاملInvestigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process
The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...
متن کاملLead Free Solder Joint Reliability Estimation by Finite Element Modelling Advantages, Challenges and Limitations
Finite element modelling (FEM) has been widely used for the estimation of the lifetime of solder joints subjected to temperature cycling. Thanks to the expertise of decades, a significant number of companies, universities and research institutes were able to have a relatively accurate estimation of life time for SnPb solder. For the leadfree solder materials, first attempts for correlation mode...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013