Modelling and simulation of CNC machine tool feed drives
نویسندگان
چکیده
The paper presents a critical appraisal of existing methods for modelling and simulation of CNC machine tool feed drives. Their goal is the development of mathematical models which adequately replicate the dynamic behaviour of the actual machines. The advantages and disadvantages of lumped parameter models and modular approach are discussed and the suitability of mixed, hybrid, distributed-lumped modelling is emphasised. Some applications of other methods to CNC machine tool feed drives are examined. The importance of a thorough study regarding the factors influencing the machine dynamic performance and the strategies for error compensation and correction is underlined. The achieved accurate simulations for multi-axis machine tool applications will be used for automatic tuning and condition monitoring purposes.
منابع مشابه
A Review on Real-time Simulation of Cnc Machine Tool Dynamics
This paper is an endeavour to critically appraise the existing methods used for real-time simulation of machine tool dynamics with the emphasis on modelling and simulation of the dynamic behaviour of CNC machine tool feed drives and mechatronic systems for machine tools. The actual approaches for linking the feed drive models with structural models for CNC machine tools are examined. Also the f...
متن کاملFeed optimization for five-axis CNC machine tools with drive constraints
Real time control of five-axis machine tools requires smooth generation of feed, acceleration and jerk in CNC systems without violating the physical limits of the drives. This paper presents a feed scheduling algorithm for CNC systems to minimize the machining time for five-axis contour machining of sculptured surfaces. The variation of the feed along the five-axis tool-path is expressed in a c...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملParameter Identification and Hybrid Mathematical Modelling Techniques Applied to Non-linear Control Systems
The study is concerned with the mathematical modelling and parameter identification of nonlinear motion control systems. The control systems under review are the axis motion control systems for a 3-axis CNC machine tool. The modelling process commences with lumped parameter methods applied to each element and then to each axis in turn. Comparing the dynamic performance of the simulated axis dri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015