Transmission comb of a distributed Bragg reflector with two surface dielectric gratings
نویسندگان
چکیده
The transmission behaviour of a distributed Bragg reector (DBR) with surface dielectric gratings on top and bottom is studied. The transmission shows a comb-like spectrum in the DBR band gap, which is explained in the Fano picture. The number density of the transmission peaks increases with increasing number of cells of the DBR, while the ratio of the average full width at half maximum to the corresponding average free spectral range, being only few percent for both transversal electric and magnetic waves, is almost invariant. The transmission peaks can be narrower than 0.1 nm and are fully separated from each other in certain wavebands. We further prove that the transmission combs are robust against randomness in the heights of the DBR layers. Therefore, the proposed structure is a candidate for an ultra-narrow-band multichannel filter or polarizer.
منابع مشابه
Practical Limitation on Operation of Nonlinear Parity-Time Bragg Gratings
The paper analyses the operation of PT Bragg gratings when the dielectric material is considered to be both dispersive and nonlinear and gain and loss are saturable. The paper demonstrates the application of the nonlinear PT Bragg Grating as an optical logic gate and an optical switch.
متن کاملPlasmonic Bragg reflector and its application on optical switching
In nowadays intergrated circuit design, the diffraction limit has restricted the downscaling of the conventional electronic components. Surface Plasmon Polaritons (SPPs) are quantized charge density oscillations that occur at the interface between metal and dielectric materials when photons couple to the free electron gas of the metal. The extraordinary properties of SPPs can be utilized for su...
متن کاملScattering of surface plasmon polaritons at abrupt surface interfaces: Implications for nanoscale cavities
We have developed a rigorous mode matching approach for the analysis of surface wave scattering at nonuniform semi-infinite dielectric-metal interfaces. An analytical derivation of the coupling coefficients between surface waves allows an efficient scattering matrix formulation to describe general structures with multiple interfaces. Using this, we resolve issues of accuracy and convergence of ...
متن کاملHybrid Dielectric-Metallic Back Reflector for Amorphous Silicon Solar Cells
In this paper, we present the design and fabrication of hybrid dielectric-metallic back surface reflectors, for applications in thin film amorphous silicon solar cells. Standard multilayer distributed Bragg reflectors, require a large number of layers in order to achieve high reflectance characteristics. As it turns out, the addition of a metallic layer, to the base of such a multilayer mirror,...
متن کاملPolarimetric DBR fiber laser sensor for strain-temperature discrimination
A polarimetric Distributed Bragg Reflector (DBR) laser sensor in a low birefringent Er-doped fiber has been proposed. The spectral overlap of two uniform fiber Bragg gratings (FBG) has been employed as filtering technique to achieve a Single Longitudinal Mode (SLM) regime. By measuring the RF beat frequency between the two orthogonal polarized lasing modes and the absolute wavelength of one mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 6 شماره
صفحات -
تاریخ انتشار 2016