Efficient Spin Injection into Silicon and the Role of the Schottky Barrier

نویسندگان

  • André Dankert
  • Ravi S. Dulal
  • Saroj P. Dash
چکیده

Implementing spin functionalities in Si, and understanding the fundamental processes of spin injection and detection, are the main challenges in spintronics. Here we demonstrate large spin polarizations at room temperature, 34% in n-type and 10% in p-type degenerate Si bands, using a narrow Schottky and a SiO2 tunnel barrier in a direct tunneling regime. Furthermore, by increasing the width of the Schottky barrier in non-degenerate p-type Si, we observed a systematic sign reversal of the Hanle signal in the low bias regime. This dramatic change in the spin injection and detection processes with increased Schottky barrier resistance may be due to a decoupling of the spins in the interface states from the bulk band of Si, yielding a transition from a direct to a localized state assisted tunneling. Our study provides a deeper insight into the spin transport phenomenon, which should be considered for electrical spin injection into any semiconductor.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Impact of Silicon Wafer Orientation on the Performance of Metal Source/Drain MOSFET in Nanoscale Regime: a Numerical Study

A comprehensive study of Schottky barrier MOSFET (SBMOSFET) scaling issue is performed to determine the role of wafer orientation and structural parameters on the performance of this device within Non-equilibrium Green's Function formalism. Quantum confinement increases the effective Schottky barrier height (SBH). (100) orientation provides lower effective Schottky barrier height in compa...

متن کامل

Tunnel barrier fabrication on Si and its impact on a spin transistor

The realization of many future spintronic devices requires efficient spin injection into semiconductor structures. Critical considerations include interfacial intermixing of the metallic components and oxygen with Si, and the conditions for Schottky barrier formation. Both impact the design of a silicon-based spin transistor, which tunnelinjects carriers from a ferromagnetic emitter into the Si...

متن کامل

Towards spin injection from silicon into topological insulators: Schottky barrier between Si and Bi2Se3

A scheme is proposed to electrically measure the spin-momentum coupling in the topological insulator surface state by injection of spin polarized electrons from silicon. As an initial approach, devices were fabricated consisting of thin (<100 nm) exfoliated crystals of Bi2Se3 on n-type silicon with independent electrical contacts to silicon and Bi2Se3. Analysis of the temperature dependence of ...

متن کامل

Europium Silicide – a Prospective Material for Contacts with Silicon

Metal-silicon junctions are crucial to the operation of semiconductor devices: aggressive scaling demands low-resistive metallic terminals to replace high-doped silicon in transistors. It suggests an efficient charge injection through a low Schottky barrier between a metal and Si. Tremendous efforts invested into engineering metal-silicon junctions reveal the major role of chemical bonding at t...

متن کامل

Title of thesis : Hot Electron Injection into Uniaxially Strained Silicon

Title of thesis: Hot Electron Injection into Uniaxially Strained Silicon Hyun Soo Kim, Master of Science, 2013 Thesis directed by: Professor Ian Appelbaum Department of Physics In semiconductor spintronics, silicon attracts great attention due to its long electron spin lifetime. Silicon is also one of the most commonly used semiconductor in microelectronics industry. The spin relaxation process...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 3  شماره 

صفحات  -

تاریخ انتشار 2013