Digital Signal Processing and Lsi in Modems for Data Transmission*)

نویسنده

  • M. VERHOECKX
چکیده

Digital signal processing and LSI are steadily being introduced in the field of data transmission. Still there is a noticeable discrepancy between existing design possibilities and actual practical application. The backgrounds of this contrast are briefly considered in this paper. A short survey on data modems is presented showing the wide diversification that has to be coped with. The main part of the paper is devoted to a few major developments that have taken place in the last five years. Particular attention is paid to the related work that has been carried out at Philips Research Laboratories.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)

Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...

متن کامل

An equalizer design technique for the PCM modem: a new modem for the digital public switched network

Modems designed for the public switched telephone network (PSTN) have conventionally been based on modeling assumptions which view the PSTN connection as an essentially analog medium. However, as the PSTN evolves toward all digital transport and switching, and particularly as major traffic sources, such as Internet service providers, increasingly have direct digital connections to the PSTN, it ...

متن کامل

Implementation of an adaptive burst DQPSK receiver over shallow water acoustic channel

In an environment such as underwater channel where placing test equipments are difficult to handle, it is much practical to have hardware simulators to examine suitably designed transceivers (transmitter/receiver). The simulators of this kind will then allow researchers to observe their intentions and carry out repetitive tests to find suitable digital coding/decoding algorithms. In this p...

متن کامل

Data Transmission with Reliability Indication

In most digital communication systems, the information bits to be transmitted are protected against transmission errors. Typically, in the transmitter redundancy is added in a clever way by means of an encoder. In the receiver, a corresponding decoder is able to detect or to correct transmission errors by exploiting the redundancy. This technique is called channel coding. Applications of channe...

متن کامل

Computational reduction during idle transmission in DSL modems

This document describes two methods for reducing computational requirements during idle transmission in remote access systems incorporating digital subscriber line (DSL) modems, including asymmetrical DSL (ADSL) systems. These methods save processing power during idle transmission by generating an idle signal using lowcomplexity techniques. The generated idle signal is made spectrally compatibl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014