Fundamental Solutions in Plane Problem for Anisotropic Elastic Medium under Moving Oscillating Source
نویسندگان
چکیده
In present article we consider the problems of concentrated point force which is moving with constant velocity and oscillating with cyclic frequency in unbounded homogeneous anisotropic elastic two-dimensional medium. The properties of plane waves and their phase, slowness and ray or group velocity curves for 2D problem in moving coordinate system are described. By using the Fourier integral transform techniques and established the properties of the plane waves, the explicit representation of the elastodynamic Green’s tensor is obtained for all types of source motion as a sum of the integrals over the finite interval. The dynamic components of the Green’s tensor are extracted. The stationary phase method is applied to derive an asymptotic approximation of the far wave field. The simple formulae for Poynting energy flux vectors for moving and fixed observers are presented too. It is noted that in the far zones the cylindrical waves are separated under kinematics and energy. It is shown that the motion bring some differences in the far field properties. They are modification of the wave propagation zones and their number, fast and slow waves appearance under transand superseismic motion and so on.
منابع مشابه
Constitutive Model for Multi-laminate Induced Anisotropic Double Hardening Elastic-plasticity of Sand
A constitutive multi-laminate based elastic-plastic model developed to be capable of accounting induced anisotropic behavior of granular material such as sand. The fabric feature or grain orientation characteristic effects through medium are considered in a rational way under any complex stress path, including cyclic loading. The salient feature of the developed model is a non-associative on pl...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کاملQuasi-Static Deformation of a Uniform Thermoelastic Half –Space Due to Seismic Sources and Heat Source
This paper investigates the quasi-static plane deformation of an isotropic thermoelastic half-space due to buried seismic sources and heat source. Governing equations of thermo-elasticity are solved to obtain solutions for seismic sources in a thermoelastic half-space. The general solutions are acquired with the aid of Laplace and Fourier transforms and with the use of boundary conditions. The ...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کاملAnalysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition
The present paper deals with the mixed mode fracture analysis of a weakened orthotropic half-plane with multiple cracks propagation. The orthotropic half-plane contains Volterra type glide and climb edge dislocations. It is assumed that the medium is under in-plane loading conditions. The distributed dislocation technique is used to obtain integral equations for the dynamic problem of multiple ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003