Computational modeling and experimental investigation of effects of compositional elements on interface and design aesthetics

نویسندگان

  • Michael Bauerly
  • Yili Liu
چکیده

This article describes computational modeling and two corresponding experimental investigations of the effects of symmetry, balance and quantity of construction elements on interface aesthetic judgments. In the first experiment, 30 black and white geometric images were developed by systematically varying these three attributes in order to validate computational aesthetic quantification algorithms with subject ratings. The second experiment employed the same image layout as Experiment 1 but with realistic looking web pages as stimuli. The images were rated by 16 subjects in each experiment using the ratio-scale magnitude estimation method against a benchmark image with average balance and symmetry values and a standard number of elements. Subjects also established an ordered list of the images according to their aesthetic appeal using the Balanced-Incomplete-Block (BIB) ranking method. Results from both experiments show that subjects are adept at judging symmetry and balance in both the horizontal and vertical directions and thus the quantification of those attributes is justified. The first experiment establishes a relationship between a higher symmetry value and aesthetic appeal for the basic imagery showing that subjects preferred symmetric over non-symmetric images. The second experiment illustrates that increasing the number of groups in a web page causes a decrease in the aesthetic appeal rating. r 2006 Elsevier Ltd. All rights reserved.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nonlinear lap joint interface modeling and updating strategies for assembled structures

A comparison between two known strategies of modeling lap joint interfaces, namely, zero-thickness and thin layer interface theories and their associated updating procedures, is made. Finite element...

متن کامل

EFFECTS OF THE HARDENED NICKEL COATING ON THE FATIGUE BEHAVIOR OF CK45 STEEL: EXPERIMENTAL, FINITE ELEMENT METHOD, AND ARTIFICIAL NEURAL NETWORK MODELING

Hardened nickel coating is widely used in many industrial applications and manufacturing processes because of its benefits in improving the corrosion fatigue life. It is clear that increasing the coating thickness provides good protection against corrosion. However, it reduces the fatigue life. Thus, applying a thin layer of coated nickel might give an acceptable corrosion protection with minim...

متن کامل

Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier

Combining the computational fluid dynamics (CFD) and the design of experiments (DOE) methods, as a mixed approach in modeling was proposed so that to simultaneously benefit from the advantages of both modeling methods. The presented method was validated using a coal hydraulic classifier in an industrial scale. Effects of operating parameters including feed flow rate, solid content and baffle le...

متن کامل

Compositional Modeling of Wax Formation in Petroleum Mixtures

Heavy organics deposition is a common problem in oil industry, especially in oil production, transportation and processing. Wax or solid paraffin series are examples of heavy organics that deposit. Precipitation and crystallization of wax causes major difficulties in different processes. Based on multi-solid theory, a basic model is modified in this paper for wax precipitation in different oils...

متن کامل

Numerical investigation on the pullout shear strength of soil-nail interface using finite element method

Soil nailing is a popular reinforcement method for stabilizing slopes, excavations, and retaining walls in many countries. The pullout capacity of the soil-nail interface is a critical parameter for the design and safety assessment of soil-nailed systems. In this paper, a three-dimensional (3D) finite element (FE) model is developed using the commercial program ABAQUS to simulate the pullout te...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • International Journal of Man-Machine Studies

دوره 64  شماره 

صفحات  -

تاریخ انتشار 2006