Cost-Effective Approach for Reducing Soft Error Failure Rate in Logic Circuits
نویسندگان
چکیده
In this paper, a new paradigm for designing logic circuits with concurrent error detection (CED) is described. The key idea is to exploit the asymmetric soft error susceptibility of nodes in a logic circuit. Rather than target all modeled faults, CED is targeted towards the nodes that have the highest soft error susceptibility to achieve cost-effective tradeoffs between overhead and reduction in the soft error failure rate. Under this new paradigm, we present one particular approach that is based on partial duplication and show that it is capable of reducing the soft error failure rate significantly with a fraction of the overhead required for full duplication. A procedure for characterizing the soft error susceptibility of nodes in a logic circuit, and a heuristic procedure for selecting the set of nodes for partial duplication are described. A full set of experimental results demonstrate the cost-effective tradeoffs that can be achieved.
منابع مشابه
Partial Error Masking to Reduce Soft Error Failure Rate in Logic Circuits
A new methodology for designing logic circuits with partial error masking is described. The key idea is to exploit the asymmetric soft error susceptibility of nodes in a logic circuit by targeting the error masking capability towards the nodes with the highest soft error susceptibility to achieve cost-effective tradeoffs between overhead and reduction in the soft error failure rate. Such techni...
متن کاملA Minimal-Cost Inherent-Feedback Approach for Low-Power MRF-Based Logic Gates
The Markov random field (MRF) theory has been accepted as a highly effective framework for designing noise-tolerant nanometer digital VLSI circuits. In MRF-based design, proper feedback lines are used to control noise and keep the circuits in their valid states. However, this methodology has encountered two major problems that have limited the application of highly noise immune MRF-based circui...
متن کاملReversible Logic Multipliers: Novel Low-cost Parity-Preserving Designs
Reversible logic is one of the new paradigms for power optimization that can be used instead of the current circuits. Moreover, the fault-tolerance capability in the form of error detection or error correction is a vital aspect for current processing systems. In this paper, as the multiplication is an important operation in computing systems, some novel reversible multiplier designs are propose...
متن کاملSoft Error Rate Reduction Using Circuit Optimization and Transient Filter Insertion
This paper describes a tunable transient filter (TTF) design for soft error rate reduction in combinational logic circuits. TTFs can be inserted into combinational circuits to suppress propagated single-event transients (SETs) before they can be captured in latches or flip-flops. TTFs are tuned by adjusting the maximum width of the propagated SET that can be suppressed. A TTF requires 6–14 tran...
متن کاملA Cost-effective Technique to Mitigate Soft Errors in Logic Circuits
The soft error rates (SER) in logic circuits increase quickly as devices scale. Existing techniques to mitigate soft errors in logic circuits often incur large overheads. In this work, we propose a ’lightweight’ technique that detects soft errors in logic circuits, utilizing the concept of temporal sampling. The technique adds some modifications to the conventional pipeline to allow data to be ...
متن کامل