Project 1 : 5 . 8 GHz RF Signal Generator
نویسندگان
چکیده
HE objective of this project was to create a 5.8 GHz Signal Generator “capable of generating a CW signal in the 5.725 5.850 ISM band capable of FCC Part 15-compliant frequency hopping.” [1] This was one part of a three-part wireless power harvesting system, including a power amplifier immediately before the transmit antenna and a charge pump at the receiver to turn on an LED. There was no requirement to transmit information, so we chose not to attempt the optional amplitude modulation for a power optimized waveform due to time constraints.
منابع مشابه
Expanding Synthesized Signal Generation
Here are.two broadband, programmable, high-spectral-purity microwave signal sources, a 2-to-1 8-GHz synthesized signal generator and a 2-to-6.2-GHz synthesizer. Both are single, compact, 13-cm-high instruments. tr REQUENCY SYNTHESIZERS are signal sources l' that produce a selected output frequency by some type of arithmetic operation on a stable reference signal, which is usually derived from a...
متن کاملWideband RF Signal Generator Implementation for Demodulator/Receiver Testing in Systems of SDR
In this paper, the design of a wideband RF signal generator for demodulator/receiver testing is presented. The design of test generator is based on direct digital synthesizer (DDS) and voltage-controlled oscillator (VCO), controlled by microprocessor. It provides generation of arbitrary waveform signal up to 4.5 GHz. Output signal level is adjustable with precision of 0.5 dB. Dynamic range of R...
متن کاملOver GHz Low-Power RF Clock Distribution For a Multiprocessor Digital System
Conventional digital clock distribution interconnection causes a severe power consumption problem for GHz clock distribution because of transmission line losses, and it exhibits difficult signal integrity problems due to clock skew, clock jitter and signal reflection. To overcome these conventional digital clock distribution limitations, optical clock distribution techniques, based on guided-wa...
متن کاملSTATUS OF KAERI 6 MeV 9.3 GHz X-BAND ELECTRON LINAC FOR CANCER TREATMENT SYSTEM
The X-band RF linear accelerators (LINAC’s) are popular for medical application due to its compactness [1, 2]. To increase the precision of treatment accuracy under circumstance in which the LINAC is mounted on an apparatus such as gantry frame or robot-arm; this is an advantage as the weight and size are more reduced [3]. It is a 9.3 GHz magnetron with the most readily available RF generator i...
متن کاملSingle-Chip Fully Integrated Direct-Modulation CMOS RF Transmitters for Short-Range Wireless Applications
Ultra-low power radio frequency (RF) transceivers used in short-range application such as wireless sensor networks (WSNs) require efficient, reliable and fully integrated transmitter architectures with minimal building blocks. This paper presents the design, implementation and performance evaluation of single-chip, fully integrated 2.4 GHz and 433 MHz RF transmitters using direct-modulation pow...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009