Electrode potential and selective ionic adsorption
نویسندگان
چکیده
Article history: Received 11 March 2009 Accepted 16 March 2009 Available online 20 March 2009 Communicated by V.M. Agranovich A simple description of the electrode potential based on the selective ionic adsorption is proposed. It is shown that if the adsorption–desorption coefficients entering in the Langmuir kinetic equation for the adsorption at the limiting surfaces are not identical, a difference of potential between the electrode and the bulk of the solution exists. In the case where the thickness of the sample is large with respect to the length of Debye, this difference of potential depends only on the adsorption–desorption coefficients and on the length of Debye of the ionic solution. © 2009 Elsevier B.V. All rights reserved.
منابع مشابه
Uultra-trace determination of cadmium (II) in aqueous environmental samples by a new ion selective electrode based on nefazodone and 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid
Background and Objective: Cadmium is a potential environmental contaminant that causes adverse effects on the environment and the health of living organisms. Therefore, designing a simple and economic technique for its determination is very important. In this respect, a potentiometric sensor based on nefazodone as the ionophore and [BMIM]PF6 as the ionic additive were developed for the determin...
متن کاملVoltammetric Determination of Venlafaxine by Using Multiwalled Carbon Nanotube- Ionic Liquid Composite Electrode
The combination of multi-walled carbon nanotubes and ionic liquid 1-octylpyridinium hexaflourophosphate (OPFP) yields a carbon nanocomposite (MWCNT-CILE) that can be well used aselectrode for electrocatalytic oxidation of venlafaxine (VEN). The influence of variousexperimental parameters including pH of the solution, the amount of multi-walled carbon nanotubeused for the modification of the car...
متن کاملElectrochemical Sensor for the Determination of Alizarin Red-S at Non-ionic Surfactant Modified Carbon Nanotube Paste Electrode
The Cyclic Voltammetric (CV) behavior of Alizarin Red-S (ARS), which is an Anthraquinone dye was examined by utilizing TX-100 modified carbon nanotube paste electrode (TX-100MCNTPE). The surfactant utilized is TX-100, and it has been found that it has good electrocatalytic activity towards ARS. Distinctive parameters like pH, scan rate, detection limit have been studied in the potential range o...
متن کاملMeasurement and Modeling of Mean Ionic Activity Coefficient in Aqueous Solution Containing NaNO3 and Poly Ethylene Glycol
Potentiometric investigation on {H2O+NaNO3+PEG1500} mixtures were made at T=308.15K, using electrochemical cells with two ion-selective electrodes, (Na+ glass) as the cation ion-selective electrode against (NO3- solvent-polymer PVC) as the anion ion-selective electrode. The mean ionic activity coefficients of NaNO3 were measu...
متن کاملIn Situ Monitor the Adsorption of Triton X-100 on Quartz Surface by an Electrode-Separated Piezoelectric Sensor
In the configuration of an electrode-separated piezoelectric sensor (ESPS), the quartz crystal surface is in a direct contact with the liquid phase. The quartz surface can be hydrated to form silanol groups, which can adsorb nonionic surfactant Triton X-100 through hydrogen-bonding interaction between the silanol OH group and the ether oxygen atoms. The adsorption process of Triton X-100 on qua...
متن کامل