Phonon anharmonicity of monoclinic zirconia and yttrium-stabilized zirconia
نویسندگان
چکیده
C. W. Li,1,2,* H. L. Smith,2 T. Lan,2 J. L. Niedziela,3 J. A. Muñoz,2 J. B. Keith,2 L. Mauger,2 D. L. Abernathy,4 and B. Fultz2 1Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee, 37831, USA 2Department of Applied Physics and Materials Science, California Institute of Technology, Pasadena, California, 91125, USA 3Instrument and Source Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee, 37831, USA 4Quantum Condensed Matter Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee, 37831, USA (Received 28 April 2014; revised manuscript received 12 January 2015; published 13 April 2015)
منابع مشابه
Comparative Study of Plasma Sprayed Yittria and Ceria Stabilized Zirconia Properties
Thermal Barrier Coatings are subjected to spallation and destabilization due to hot corrosion.Recently, Ceria Stabilized Zirconia (CSZ)-based TBCs have been intensively investigated for the YSZreplacement because CSZ has a much lower thermal conductivity and a higher expected thermalexpansion coefficient than those of YSZ. In this research, Yttria stabilized zirconia (YSZ) andceria stabilized z...
متن کاملCharacterization of Tetragonal-Monoclinic, Ferroelastic Transformation and Domain Boundaries in Zirconia-Alloyed Yttrium Tantalate
There is a continuous search for an alternative oxide material to the yttria-stabilized zirconia (7YSZ), which currently serves as the thermal barrier coating materials for turbine engines [1]. The new material should have low thermal conductivity, high temperature stability, and ferroelastic toughening as exhibited by the 7YSZ. Therefore in this study, the Y-Ta-Zr-O system was investigated. Th...
متن کاملEffect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength
Ceramic dental materials have been considered as alternatives to metals for dental implants application. In this respect, zirconia tetragonal stabilized with %3 yttrium, is of great importance among the ceramic materials for endosseous dental implant application. Because of its good mechanical properties and color similar to tooth. The aim and novelty of this study was to design and prepare Y-T...
متن کاملSynthesis of zirconia sol stabilized by trivalent cations (yttrium and neodymium or americium): a precursor for Am-bearing cubic stabilized zirconia.
Recent concepts for nuclear fuel and targets for transmuting long-lived radionuclides (minor actinides) and for the development of innovative Gen-IV nuclear fuel cycles imply fabricating host phases for actinide or mixed actinide compounds. Cubic stabilized zirconia (Zr, Y, Am)O(2-x) is one of the mixed phases tested in transmutation experiments. Wet chemical routes as an alternative to the pow...
متن کاملInvestigating the effects of Magnesia addition on properties, phase transformation and microstructure of gelcasted Zirconia bodies
Magnesia Partially Stabilized Zirconia (Mg-PSZ) is the best material for casting nozzles used in steelmaking industry due to high melting point, high mechanical strength, high thermal shock resistance, high toughness, chemical stability and neutrality, which these nozzles should be fabricated using cold isostatic pressing (CIP) method, however wet processing methods such as gelcasting can lead ...
متن کامل