First Beam Measurements of the Fnal Hins Rfq*
نویسنده
چکیده
The High Intensity Neutrino Source (HINS) is a research project to address accelerator physics and technology questions for a new-concept, low-energy, high-intensity, long-pulse H superconducting linac. HINS will consist of a 50 kKeV ion source, a 2.5 MeV Radiofrequency Quadrupole (RFQ), and a 10 MeV room temperature spoke resonator acceleration section, followed by superconducting spoke resonator acceleration sections. To date a proton ion source and the RFQ module have operated with beam. This paper presents the results of first beam measurements through the HINS RFQ.
منابع مشابه
Low Energy Demonstration Accelerator (leda) Beam Instrumentation: Rfq-accelerated Beam Results
Beam diagnostic instrumentation is being developed for the LEDA, a 6.7-MeV, 100-mA-cw proton accelerator, presently being commissioned at the Los Alamos National Laboratory (LANL). This instrumentation will be the basis for much of the Accelerator Production of Tritium and the Spallation Neutron Source linac. Located in the LEDA injector and the high energy beam transport (HEBT) this initial in...
متن کاملTestbench of the HIT RFQ
The RFQ cavity [1] for the HIT facility [2] was delivered to GSI in the first quarter of 2005. RF-tests with an rf power up to 200 kW and a pulse width of 500 μsec could be carried out successfully after a short time of rfconditioning. A testbench for the RFQ cavity was constructed to allow for exact measurements of the output energy with the time of flight (ToF) method in addition to the beams...
متن کاملتطبیق پذیری باریکه -H در قسمت انرژی پایین و متوسط ماشین Linac4 در سرن
Linac4 is the near future 160 MeV H- linear accelerator of the CERN presently under construction. It will replace the present Linac2 as injector of the proton accelerator complex in CERN. The Linac4 is composed of a 45 keV ion source, a Low Energy Beam Transport (LEBT), a 352.2 MHz Radio Frequency Quadrupole (RFQ), which accelerates the beam to 3 MeV, and a Medium Energy Beam Transport (MEBT), ...
متن کاملTechniques for Intense-Proton-Beam Profile Measurements
In a collaborative effort with industry and several national laboratories, the Accelerator Production of Tritium (APT) facility and the Spallation Neutron Source (SNS) linac are presently being designed and developed at Los Alamos National Laboratory (LANL). The APT facility is planned to accelerate a 100 mA H cw beam to 1.7 GeV and the SNS linac is planned to accelerate a 1 to 4 mA-average, H,...
متن کاملLinac Commissioning for the Heavy Ion Cancer Therapy Facility HIT
The accelerator part of the clinical facility for cancer therapy HIT using energetic proton and ion beams (C, He and O) has been installed during 2006 at the Radiologische Universitätsklinik in Heidelberg, Germany [1]. The commissioning of the injector linac was performed in three steps for the LEBT, the RFQ and the IH-DTL and has successfully ended in December 2006. Some major results are brie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010