High-efficiency cascade CdS/CdSe quantum dot-sensitized solar cells based on hierarchical tetrapod-like ZnO nanoparticles.

نویسندگان

  • Hsin-Ming Cheng
  • Kuo-Yen Huang
  • Kun-Mu Lee
  • Pyng Yu
  • Shih-Chin Lin
  • Jin-Hua Huang
  • Chun-Guey Wu
  • Jau Tang
چکیده

Quantum dot-sensitized solar cells (QDSCs) constructed using cascade CdS/CdSe sensitizers and the novel tetrapod-like ZnO nanoparticles have been fabricated. The cascade co-sensitized QDSCs manifested good electron transfer dynamics and overall power conversion efficiency, compared to single CdS- or CdSe-sensitized cells. The preliminary CdS layer is not only energetically favorable to electron transfer but behaves as a passivation layer to diminish the formation of interfacial defects during CdSe synthesis. On the other hand, the anisotropic tetrapod-like ZnO nanoparticles, with a high electron diffusion coefficient, can afford a better carrier transport than traditional ZnO nanoparticles. The resultant solar cell yielded an excellent performance with a solar power conversion efficiency of 4.24% under simulated one sun (AM1.5G, 100 mW cm(-2)) illumination.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

ZnO nanoparticle based highly efficient CdS/CdSe quantum dot-sensitized solar cells.

20 nm ZnO nanoparticles are used to fabricate the mesoporous photoanode of the CdS/CdSe quantum dot-sensitized solar cells by the simple doctor blade method. A maximum power conversion efficiency of 4.46% has been achieved, which indicated exciting prospects for ZnO nanoparticle based quantum dot-sensitized solar cells.

متن کامل

SILAR Sensitization as an Effective Method for Making Efficient Quantum Dot Sensitized Solar Cells

CdSe quantum dots were in situ deposited on various structures of TiO2 photoanode by successive ionic layer adsorption and reaction (SILAR). Various sensitized TiO2 structures were integrated as a photoanode in order to make quantum dot sensitized solar cells. High power conversion efficiency was obtained; 2.89 % (Voc=524 mV, Jsc=9.78 mA/cm2, FF=0.56) for the cells that sensitized by SILAR meth...

متن کامل

Preparation of CdIn2S4-CdS nanocomposite via a green route and using them in dot-sensitized solar cells for boosting efficiency

In this work In2S3 and CdS nanoparticles were prepared by a simple hydrothermal method and then annealed at 500 °C for 2 h in an Ar gas until CdIn2S4(CdIS)-CdS nanocomposites were formed. Afterwards, efficiency of the as-synthesized CdIS-CdS nanocomposite in quantum dot-sensitized solar cells (QDSSCs) was evaluated. For this purpose, the as-prepared CdIS-CdS nanocomposites were deposited on TiO...

متن کامل

Synthesis and Characterization of Graphene-ZnO Nanocomposite and its Application in Photovoltaic Cells

In this paper, we present a simple method for preparation of graphene-ZnO nanocomposites (G-ZnO). The method is based on thermal treatment of the graphene oxide (GO)/ZnO paste which reduces the graphene oxide into the graphene and leads to the formation of the G-ZnO nanocomposite. The structure, morphology and optical properties of synthesized nanocomposites are characterized with XRD, FESEM, F...

متن کامل

Novel nanowire array based highly efficient quantum dot sensitized solar cell.

In this communication, a novel CdSe/CdS/ZnO nanowire array fabricated by a 3-step solution-based method was used as a photoanode of a quantum dot sensitized solar cell, which generated a maximum power conversion efficiency of 4.15%.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 14 39  شماره 

صفحات  -

تاریخ انتشار 2012