A Natural Gas to Liquids Process Model for Optimal Operation

نویسندگان

  • Mehdi Panahi
  • Ahmad Rafiee
  • Sigurd Skogestad
  • Magne Hillestad
چکیده

The design and optimization of a natural gas to hydrocarbon liquids (GTL) process is considered, mainly from the view of maximizing the variable income during operation. Autothermal reforming (ATR) is used for synthesis gas production. The kinetic model for Fischer Tropsch (FT) reactions is the one given by Iglesia et al. for a cobalt-based FT reactor. For the product distribution, three alternative expressions for the chain growth factor α are compared.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Stochastic Optimal Operation and Risk Analysis for Integrated Power and Gas Systems

The increment integration of renewable distributed energies means the desired operation of the electric power system will significantly depend on the performance of primary energy. In this order, an integrated approach for mutual interaction between the electricity and natural gas systems has been considered for the purpose of ensuring optimal energy exchanging between the electric power system...

متن کامل

Two-Stage Stochastic Day-Ahead Market Clearing in Gas and Power Networks Integrated with Wind Energy

The significant penetration rate of wind turbines in power systems made some challenges in the operation of the systems such as large-scale power fluctuations induced by wind farms. Gas-fired plants with fast starting ability and high ramping can better handle natural uncertainties of wind power compared to other traditional plants. Therefore, the integration of electrical and natural gas syste...

متن کامل

COUPLING MODEL FOR MULTI-COMPONENT GAS PERMEATION PROCESS

A gas permeation model (Coupling Model) has been developed which has the flexibility to be used for different membrane module configurations. The aim of this work is to predict the performance of a single stage gas separation process using membranes and provide a comprehensive description of process parameters like flow rates, composition, stage cut and stream pressure. The significant feature ...

متن کامل

Selection of Controlled Variables for a Natural Gas to Liquids Process

The aim of this work is to select the best individual or combined controlled variables (CVs) for a natural gas to hydrocarbon liquids (GTL) process based on the idea of self-optimizing control. The objective function is to maximize the variable income of the plant, and two modes of operation are studied. In mode I, where the natural gas flow rate is given, there are three unconstrained degrees ...

متن کامل

Effect of Hydrogen Addition to Natural Gas on Homogeneous Charge Compression Ignition Combustion Engines Performance and Emissions Using a Thermodynamic Simulation

The HCCI combustion process is initiated due to auto-ignition of fuel/air mixture which is dominated by chemical kinetics and therefore fuel composition has a significant effect on engine operation and a detailed reaction mechanism is essential to analysis HCCI combustion. A single zone-model permits to have a detailed chemical kinetics modeling for practical fuels. In this study a single-zone ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011