Electrical Properties of Indium Doped Alumina (Al2O3) Thin Films

نویسندگان

  • Hadaate Ullah
  • Shahin Mahmud
چکیده

To know the electrical properties of any materials is very important for practical application of that material. In this paper I have tried to find out the proper electrical properties of Indium doped Alumina (Al2O3) for practical application of this Alumina. For this purpose all thin films are deposited on glass substrate by electron beam evaporation technique at a pressure of about 1.5 x 10-6 torr and at temperature of 307K. The thickness of Indium doped Al2O3 films (25%w, 30%w and 40% w of In2O3) range from 68 nm to 183 nm. For 25% In2O3 doped alumina the conductivity at room temperature is 24.10mho/cm, for 30% In2O3 doped alumina this value is 82.99mho/cm and for 40% In2O3 doped alumina this is 129.10mho/cm. The resistivity and sheet resistance decrease with the increase of doping concentration that means the conductivity increases with doping concentration.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates

Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...

متن کامل

Studies on Structural and Optical Characterization of In-Zn-S Ternary Thin Films Prepared by Spray Pyrolysis

Thin films of indium doped zinc sulfide (ZnS) for different indium (In) concentrations (x=0.0 - 0.8) were deposited onto glass substrate by spray pyrolysis method at 523K temperature. Aqueous solution of zinc acetate, indium chloride and thiorea were used to deposit the In-Zn-S film. The deposited thin films were characterized by Energy dispersive X-ray (EDX), Scanning electron microscopy (SEM)...

متن کامل

A Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates

The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...

متن کامل

The Effects of SR Irradiation on Tin-Doped Indium Oxide Thin Film Prepared by RF Magnetron Sputtering

Tin-doped indium oxide (ITO) thin films have been widely used as transparent electrodes of flat panel displays and solar cells because of its low electrical resistivity and high transmittance to visible light. In order to improve the electrical and optical properties of ITO thin films, many attempts have been carried out by means of several methods, for example, highly dense plasma assisted ele...

متن کامل

Structural and electrical properties of In-doped vanadium oxide thin films prepared by spray pyrolysis

The In-doped vanadium pentoxide nanostructures with different doping levels including 0, 10, 20 and 30 at.% were prepared by the spray pyrolysis technique. The prepared thin films were characterized by the x-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results revealed that the films were crystalline in tetragonal phase. Increasing the In-doping level made the structure...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015