Network Optimization and Synthesis using a Combined Mechanical and Electrical System: Application to Vehicle Suspension Control
نویسندگان
چکیده
This paper introduces a mechatronic network and applies it to vehicle suspensions for performance optimization. The mechatronic network consists of a ball-screw and permanent magnet electric machinery (PMEM), such that the system impedance is a combination of mechanical and electrical impedances. We then apply the network to vehicle suspensions, and demonstrate the performance benefits and their sensitivities to parameter variations. The optimal electrical impedances are constructed and experimentally verified. Based on the results, the mechatronic network is deemed effective.
منابع مشابه
Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller
Using hydraulic interconnected suspension (HIS) system to improve the stability of the vehicles is a matter of recent interest of many scholars. In this paper, application of this kind of suspension system and its impact on the stability of the vehicle are studied. The governing dynamic relations of the system are presented, using free body diagram, Newton-Euler motion equations, and relations ...
متن کاملNeural Controller Design for Suspension Systems
The main problem of vehicle vibration comes from road roughness. An active suspension systempossesses the ability to reduce acceleration of sprung mass continuously as well as to minimizesuspension deflection, which results in improvement of tire grip with the road surface. Thus, braketraction control and vehicle maneuverability can be improved consider ably .This study developeda new active su...
متن کاملDesign of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System
Active vehicle suspension system is designed to increase the ride comfort and road holding of vehicles. Due to limitations in the external force produced by actuator, the design problem encounters the constraint on the control input. In this paper, a novel nonlinear controller with the input constraint is designed for the active suspension system. In the proposed method, at first, a constrained...
متن کاملPareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE)
The primary function of a suspension system of a vehicle is to isolate the road excitations experienced by the tires from being transmitted to the passengers. In this paper, we formulate an optimal vehicle suspension design problem with the quarter-car vehicle dynamic model. A new multi-objective genetic algorithm is used for Pareto optimization of a two-degree of freedom vehicle vibration mode...
متن کاملOptimal Roll Center Height of Front McPherson Suspension System for a Conceptual Class A Vehicle
In this paper, the effects of roll center height of McPherson suspension mechanism on dynamic behaviour of a vehicle are first studied, and then the optimum location of roll center of this suspension system is determined for a conceptual Class A vehicle. ADAMS/Car software was used for the analysis of vehicle dynamic behaviour in different positions of suspension roll center. Next, optimization...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010