Isochemical control over structural state and mechanical properties in Pd-based metallic glass by sputter deposition at elevated temperatures
نویسندگان
چکیده
منابع مشابه
A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings
In this investigation, MoSx/Cr coatings were deposited by direct-current magnetron sputter onto Ck45 (AISI 1045) plain carbon steel substrates. The MoSx/Cr ratio in the coatings was controlled by sputtering the composite targets. The chemical characterization was performed using EDX (energy dispersive X-ray analysis); the structural characterization was accomplished by X-ray diffraction (XRD) s...
متن کاملStructural, Optical and Defect State Analyses of ZnO Nanoparticle Films
Synthesis of ZnO nanostructures films by a co-precipitation followed by the deposition processed onto a glass substrate by spin-coating technique was carried out. The effect of annealing temperatures (from 250 to 325 °C for 30 min) on the structural and optical properties of the ZnO films have been investigated. The structural studies reveal that ZnO films are polycrystalline with hexagonal wur...
متن کاملFlexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملStructural and mechanical properties of nanostructured tungsten oxide thin films
This study presents structural and mechanical properties of WO3 thin films deposited on glass substrates at different temperatures by radio frequency reactive magnetron sputtering. WO3 films deposited at temperatures up to 200uC are found as amorphous, but crystalline at 300 and 400uC. Chemical analysis reveals the overstoichiometry of the films. The diffusion of sodium ions from glass substrat...
متن کاملStructural Properties of Post Annealed ITO Thin Films at Different Temperatures
Indium tin oxide (ITO) thin films were deposited on glass substrates by RF sputtering using an ITO ceramic target (In2O3-SnO2, 90-10 wt. %). After deposition, samples were annealed at different temperatures in vacuum furnace. The post vacuum annealing effects on the structural, optical and electrical properties of ITO films were investigated. Polycrystalline...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016