Common Interval Support in Bidirectional Forwarding Detection
نویسندگان
چکیده
Bidirectional Forwarding Detection (BFD) requires that messages be transmitted at regular intervals and provides a way to negotiate the interval used by BFD peers. Some BFD implementations may be restricted to only support several interval values. When such BFD implementations speak to each other, there is a possibility of two sides not being able to find a common value for the interval to run BFD sessions.
منابع مشابه
Management of DiffServ-over-MPLS Transit Networks with BFD/OAM in ForCES Architecture
This paper proposes a management of DiffServ-over-MPLS transit network with BFD(Bidirectional Forwarding Detection)/OAM (operation, administration and maintenance) in ForCES (Forwarding and Control Element Separation) architecture for QoS-guaranteed DiffServ-over-MPLS traffic engineering. The proposed BFD and ForCES functions are implemented on Intel 2400 network processor, where BFD/OAM packet...
متن کاملBidirectional Forwarding Detection (BFD) on Link Aggregation Group (LAG) Interfaces
This document defines a mechanism to run Bidirectional Forwarding Detection (BFD) on Link Aggregation Group (LAG) interfaces. It does so by running an independent Asynchronous mode BFD session on every LAG member link. This mechanism allows the verification of member link continuity, either in combination with, or in absence of, Link Aggregation Control Protocol (LACP). It provides a shorter de...
متن کاملBidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs)
One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane proc...
متن کاملFast Failure Detection in Multipoint Networks
Bridged Ethernet and IP routing and forwarding are without any doubt the most deployed network technologies, mainly because of their robust, low-cost and easy-to-deploy-character. Solutions to provide fast recovery over these technologies are thus a highly desired feature. Fast recovery not only needs a fast switchover (e.g. using IPFastReRoute), but also requires fast failure detection. Howeve...
متن کاملDemo: Implementing iptables using a programmable stateful data plane abstraction
Iptables is a well known Linux’s user interface to control the Netfiltermodule, which is responsible for processing packets traversing the Linux’s networking subsystem. In cooperation with the conntrackmodule, Netfilter supports a wide range of network functions such as: filtering, NAT, stateful firewall, load balancer, anomaly detection, etc. Given the central role of the iptables’ functions i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- RFC
دوره 7419 شماره
صفحات -
تاریخ انتشار 2014