The Structure of Liquid Silver-Copper Alloys'1"
نویسنده
چکیده
für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namensnennung 4.0 Lizenz. The Structure of Liquid Silver-Copper Alloys'1"
منابع مشابه
INVESTIGATING THE PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-COPPER AND SILVER DENTAL-FILLING AMALGAM ALLOYS
Abstract: The aim of the present investigation is to study the physical and mechanical characteristics of dental-filling spherical high-copper and silver amalgams and to compare them with a common high-copper domestic unicompositional amalgam. In this study, cylindrical specimens were mechanically condensed according to the ISO 1559:1986 Standard in order to measure the compressive strength, Vi...
متن کاملStability and structure of nanowires grown from silver, copper and their alloys by laser ablation into superfluid helium.
Nanowires with 5 nm diameter made of silver, copper, and their alloys were grown in superfluid helium. The silver nanowires being heated to 300 K disintegrated into individual clusters. In contrast, copper nanowires were stable at room temperature, and nanowires made of alloys were also stable despite their low melting temperature.
متن کاملControl Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper
Titanium carbide is used as an attractive reinforcement to produce particulate metal matrix composites. One of the problems to use this carbide as a reinforcement in copper-based composites is the lack of wetability in Cu-TiC system. This property improves as the C/Ti ratio in carbide decreases. Problems to use this carbide as a reinforcement in copper-based composites is the lack of wetabiity...
متن کاملControl Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper
Titanium carbide is used as an attractive reinforcement to produce particulate metal matrix composites. One of the problems to use this carbide as a reinforcement in copper-based composites is the lack of wetability in Cu-TiC system. This property improves as the C/Ti ratio in carbide decreases.
Problems to use this carbide as a reinforcement in copper-based composites is the lack of wetabii...
متن کاملModelling of nodular particle growth in a liquid-solid film during condensation experiments of copper-silver alloys
Silver-copper alloys are condensed in a liquid-solid domain of the phase diagram on a tilted molybdenum substrate regulated in temperature. After a droplets regime, a film which contains a monolayer of nodular solid crystals forms. The size distribution and density of the particles in the film are measured after different condensation times. Results show that in our experimental conditions a ri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012