High level measurement comparison on a high performance multifunction calibrator between THE INRIM-Lab for multifunction instruments calibration and an Accredited Electrical Calibration Laboratory
نویسندگان
چکیده
R sumé. Cet article présente une comparaison de mesures entre le laboratoire pour l'étalonnage des instruments électriques multifonctions de l’Institut national de métrologie de recherche (INRIM) et un laboratoire d'étalonnage électrique de haut niveau. L'instrument à étalonner utilisé est un calibrateur multifonction de haute performance qui a été choisi pour l'amplitude de ses champs de mesure et son meilleur définissabilité (incertitude intrinsèque) que celle d'un multimètre numérique. L'analyse des résultats a été effectuée en évaluant le degré de corrélation entre les mesures des deux laboratoires. L'erreur-type était inférieur à 1 pour tous les points de mesure.
منابع مشابه
1 – 10 k high Precision transportable Setup to calibrate Multifunction Electrical instruments
A temperature controlled 1 –10 kΩ standard Resistors transportable setup was developed at National Institute of Metrological Research, (INRIM) for the calibration and adjustment of multifunction electrical instruments. The two Standards consist respectively of two 10 and 100 k parallel connected resistors nets inserted in a temperature controlled aluminium box. Novelty of the realization is...
متن کامل1 Ω – 10 k Ω High Precision Resistance Setup to calibrate Multifunction Electrical instruments
A temperature controlled 1 Ω–10 kΩ Standard resistors setup was developed at National Institute of Metrological Research, (INRIM). The aim of this realization was the involvement of the setup resistors in the traceability transfer process to high accuracy multifunction electrical instruments used in Secondary Electrical Calibration Laboratories or even their use as primary Standards in high lev...
متن کامل1 Ω–10 kΩ high accuracy standard setup for calibration of multifunction electrical instruments
A temperature controlled 1 Ω and 10 kΩ standard resistors setup has been developed at National Institute of Metrological Research, (INRIM), to transfer the traceability to high accuracy multifunction electrical instruments used in Secondary calibration laboratories. These two standards are formed respectively by ten in parallel connected 10 Ω and 100 kΩ resistors inserted into a temperature con...
متن کاملMetrology and Measurement Systems
A national comparison of dc resistance at 10 M and 1G level was organized by the Electromagnetic Division of National Institute of Metrological Research (INRIM, Italy) and piloted by the same Division. This comparison took place between January and April of 2008 with the participation of 8 secondary Laboratories accredited by the Italian Accreditation of Calibration Laboratories Service (SIT). ...
متن کاملCalibration of iridium-192 source by ionization chamber for high dose rate brachytherapy
Background: The effectiveness and safety of brachytherapy treatment is mainly concerned with the calibration of sources and their traceability to internationally accepted Standards. Secondary Standard Dosimetry Laboratory (SSDL) does not offer calibration of ionization chambers with gamma-ray spectrum of high dose rate source 192Ir . This work has been carried out to calibrate the high dose rat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015