Direct Synthesis of Carbon Nanotube Field Emitters on Metal Substrate for Open-Type X-ray Source in Medical Imaging
نویسندگان
چکیده
We report the design, fabrication and characterization of a carbon nanotube enabled open-type X-ray system for medical imaging. We directly grew the carbon nanotubes used as electron emitter for electron gun on a non-polished raw metallic rectangular-rounded substrate with an area of 0.1377 cm² through a plasma enhanced chemical vapor deposition system. The stable field emission properties with triode electrodes after electrical aging treatment showed an anode emission current of 0.63 mA at a gate field of 7.51 V/μm. The 4.5-inch cubic shape open type X-ray system was developed consisting of an X-ray aperture, a vacuum part, an anode high voltage part, and a field emission electron gun including three electrodes with focusing, gate and cathode electrodes. Using this system, we obtained high-resolution X-ray images accelerated at 42-70 kV voltage by digital switching control between emitter and ground electrode.
منابع مشابه
On-chip electron-impact ion source using carbon nanotube field emitters
Articles you may be interested in Fabrication and characterization of single carbon nanotube emitters as point electron sources Appl. Source brightness and useful beam current of carbon nanotubes and other very small emitters Carbon nanotubes synthesized by biased thermal chemical vapor deposition as an electron source in an x-ray tube Appl. On-chip vacuum microtriode using carbon nanotube fiel...
متن کاملHighly stable carbon nanotube field emitters on small metal tips against electrical arcing
Carbon nanotube (CNT) field emitters that exhibit extremely high stability against high-voltage arcing have been demonstrated. The CNT emitters were fabricated on a sharp copper tip substrate that produces a high electric field. A metal mixture composed of silver, copper, and indium micro- and nanoparticles was used as a binder to attach CNTs to the substrate. Due to the strong adhesion of the ...
متن کاملCarbon Nanotube Electron Emitter for X-ray Imaging
The carbon nanotube field emitter array was grown on silicon substrate through a resist-assisted patterning (RAP) process. The shape of the carbon nanotube array is elliptical with 2.0 × 0.5 mm for an isotropic focal spot size at anode target. The field emission properties with triode electrodes show a gate turn-on field of 3 V/μm at an anode emission current of 0.1 mA. The author demonstrated ...
متن کاملStable Field Emitters for a Miniature X-ray Tube Using Carbon Nanotube Drop Drying on a Flat Metal Tip
Stable carbon nanotube (CNT) field emitters for a vacuum-sealed miniature X-ray tube have been fabricated. The field emitters with a uniform CNT coating are prepared by a simple drop drying of a CNT mixture solution that is composed of chemically modified multi-walled CNTs, silver nanoparticles, and isopropyl alcohol on flat tungsten tips. A highly thermal- and electrical-conductive silver laye...
متن کاملSynthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity
Sol-gel technique was used to coat multiwall carbon nanotubes (MWCNTs) with anatase titania to increasing the surface area and improve the photocatalytic activity of TiO2. Room temperature ballistic conduct of MWCNT combined with semiconducting behavior of anatase brought about a photocatalytic improvement of ~37 % with respect to the highest methyl orange decolorization flair. For characteriza...
متن کامل