A molecular dynamics model of the atomic structure of dysprosium alumino-phosphate glass.

نویسندگان

  • Richard A Martin
  • Gavin Mountjoy
  • Robert J Newport
چکیده

Molecular dynamics (MD) has been used to identify the relative distribution of dysprosium in the phosphate glass DyAl(0.30)P(3.05)O(9.62). The MD model has been compared directly with experimental data obtained from neutron diffraction to enable a detailed comparison beyond the total structure factor level. The MD simulation gives [Formula: see text] correlations at 3.80(5) and 6.40(5) Å with relative coordination numbers of 0.8(1) and 7.3(5), thus providing evidence of minority rare-earth clustering within these glasses. The nearest neighbour Dy-O peak occurs at 2.30 Å with each Dy atom having on average 5.8 nearest neighbour oxygen atoms. The MD simulation is consistent with the phosphate network model based on interlinked PO(4) tetrahedra where the addition of network modifiers Dy(3+) depolymerizes the phosphate network through the breakage of P-(O)-P bonds whilst leaving the tetrahedral units intact. The role of aluminium within the network has been taken into explicit account, and Al is found to be predominantly (78%) tetrahedrally coordinated. In fact all four Al bonds are found to be to P (via an oxygen atom) with negligible amounts of Al-O-Dy bonds present. This provides an important insight into the role of Al additives in improving the mechanical properties of these glasses.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulations reveal the role of composition into the atomic-level flexibility of bioactive glass cements.

Bioactive glass ionomer cements (GICs), the reaction product of a fluoro-alumino-silicate glass and polyacrylic acid, have been in effective use in dentistry for over 40 years and more recently in orthopaedics and medical implantation. Their desirable properties have affirmed GIC's place in the medical materials community, yet are limited to non-load bearing applications due to the brittle natu...

متن کامل

SYNTHESIS, CHARACTERIZATION AND CATALYTIC BEHAVIOUR OF SPECIAL TYPE OF SILICO ALUMINO-PHOSPHATE WITH OPAL STRUCTURE

In this study a special type of silicoaluminophosphate with opal structure (Opal-SAPO) was prepared under microwave condition using tetraethylorthosilicate (TEOS), triethanolamine (TEA), aluminiumisopropoxid and phosphoric acid 85%. The product was characterized by X-ray diffraction (XRD), thermogravimetric (TGA) and Fourier Infrared Spectroscopy (FTIR).The crystalline product showed a good act...

متن کامل

Molecular Dynamics Simulation of the Structure and Properties of Lithium Phosphate Glasses

A new forcefield model was developed for the computer simulation of phosphate materials that have many important applications in the electronics and biomedical industries. The model provides a fundamental basis for the evaluation of phosphate glass structure and thermodynamics. Molecular dynamics simulations of a series of lithium phosphate glass compositions were performed using the forcefield...

متن کامل

Dynamics of Macro–Nano Mechanical Systems; Fixed Interfacial Multiscale Method

The continuum based approaches don’t provide the correct physics in atomic scales. On the other hand, the molecular based approaches are limited by the length and simulated process time. As an attractive alternative, this paper proposes the Fixed Interfacial Multiscale Method (FIMM) for computationally and mathematically efficient modeling of solid structures. The approach is applicable to mult...

متن کامل

Microwave Absorption of Barium Borosilicate, Zinc Borate, Fe-Doped Alumino-Phosphate Glasses and Its Raw Materials

This study presents microwave absorption of raw materials used in barium borosilicate, Fe-doped alumina phosphate and zinc borate glass. Microwave absorption was investigated for the raw materials SiO2, Na2CO3, BaCO3, BPO4, Al(PO3)3, Mg(PO3)2, Al(OH)3, TiO2. The study shows that SiO2 could be heated directly above 1000 °C within 30 min at 1.5 kW microwave output (MW) power and 0.8 kW MW power i...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Journal of physics. Condensed matter : an Institute of Physics journal

دوره 21 7  شماره 

صفحات  -

تاریخ انتشار 2009