Surface Plasmon Resonance Sensor with Magneto-optical Thin Film
نویسندگان
چکیده
Thanks to resonant excitation of surface plasmons, SPR sensors including ferromagnetic thin films allow the enhancement of the magneto-optical response. MO-SPR structures with Au/Co/Au sandwiches are theoretically analyzed in transverse configuration. The influence of sandwich film thicknesses and layer order is discussed. The optimized geometry and corresponding feedback are specified.
منابع مشابه
Fabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملMagneto-optical Sandwiches for Surface Plasmon Resonance Systems
The Au/Fe grating/Au sandwiches located on BK-7 substrate have been applied in Otto configuration for magneto-optical (MO) surface plasmon resonance sensor units. We analyzed the reflectance and Kerr magneto-optical parameters of used structure for different periodicity Λ and thickness of golden films. The height of Fe dots placed in Au matrix has been fixed at 20 nm, the laser incidence beam w...
متن کاملOptimization of Sensitivity and Stability of Gold/Silver bi-Layer Thin Films Used in Surface Plasmon Resonance Chips
The aim of this study is experimental assay of sensitivity and stability of a bimetallic silver/gold SPR sensor chip. This chip utilizes the sensitivity of the silver and the stability of the gold. Moreover, the Silver layer (instead of usual Cr or Ti layer) was used as an adhesive intermediate layer between the Gold layer and the glass substrate. The optimization of the Gold/Silver thickness u...
متن کاملAn In-situ Real-Time Optical Fiber Sensor Based on Surface Plasmon Resonance for Monitoring the Growth of TiO2 Thin Films
An optical fiber sensor based on surface plasmon resonance (SPR) is proposed for monitoring the thickness of deposited nano-thin films. A side-polished multimode SPR optical fiber sensor with an 850 nm-LD is used as the transducing element for real-time monitoring of the deposited TiO2 thin films. The SPR optical fiber sensor was installed in the TiO2 sputtering system in order to measure the t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010