Optical properties of as-grown and annealed InAs quantum dots on InGaAs cross-hatch patterns

نویسندگان

  • Chalermchai Himwas
  • Somsak Panyakeow
  • Songphol Kanjanachuchai
چکیده

InAs quantum dots (QDs) grown on InGaAs cross-hatch pattern (CHP) by molecular beam epitaxy are characterized by photoluminescence (PL) at 20 K. In contrast to QDs grown on flat GaAs substrates, those grown on CHPs exhibit rich optical features which comprise as many as five ground-state emissions from [1-10]- and [110]-aligned QDs, two wetting layers (WLs), and the CHP. When subject to in situ annealing at 700°C, the PL signals rapidly degrades due to the deterioration of the CHP which sets the upper limit of overgrowth temperature. Ex situ hydrogen annealing at a much lower temperature of 350°C, however, results in an overall PL intensity increase with a significant narrowing and a small blueshift of the high-energy WL emission due to hydrogen bonding which neutralizes defects and relieves associated strains.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The structural and optical properties of GaSb/InGaAs type-II quantum dots grown on InP (100) substrate

We have investigated the structural and optical properties of type-II GaSb/InGaAs quantum dots [QDs] grown on InP (100) substrate by molecular beam epitaxy. Rectangular-shaped GaSb QDs were well developed and no nanodash-like structures which could be easily found in the InAs/InP QD system were formed. Low-temperature photoluminescence spectra show there are two peaks centered at 0.75eV and 0.7...

متن کامل

Proton implantation-induced intermixing of InAs/ InP quantum dots

Proton implantation-induced intermixing of InAs quantum dots QDs capped with InP, GaInAsP, and InP and InGaAs layers grown by metal-organic chemical vapor deposition is investigated. The samples are annealed at 750, 800, 850, and 900 °C for 30 s and thermal stability of the QDs is studied. The optimum annealing temperature is around 800 °C which gives maximum implantation-induced energy shift. ...

متن کامل

The effects of quantum dot coverage in InAs/(In)GaAs nanostructures for long wavelength emission

We present a study on the effects of quantum dot coverage on the properties of InAs dots embedded in GaAs and in metamorphic In0.15Ga0.85As confining layers grown by molecular beam epitaxy on GaAs substrates. We show that redshifted emission wavelengths exceeding 1.3 μm at room temperature were obtained by the combined use of InGaAs confining layers and high quantum dot coverage. The use of hig...

متن کامل

Effects of annealing on performances of 1.3-μm InAs-InGaAs-GaAs quantum dot electroabsorption modulators

In this work, we investigated the effects of quantum dot (QD) annealing (as-grown, 600°C-annealed, and 750°C-annealed) on the preliminary performances of 1.3-μm InAs-InGaAs-GaAs quantum dot electroabsorption modulators (QD-EAMs). Both extinction ratio and insertion loss were found to vary inversely with the annealing temperature. Most importantly, the 3-dB response of the 750°C-annealed lumped-...

متن کامل

Monolithic Passively Mode-Locked Lasers using Quantum Dot or Quantum Well Materials Grown on GaAs Substrates

In this work, the optical characteristics of monolithic passively mode-locked lasers (MLLs) fabricated from 1.24-μm InAs dots-in-a-Well (DWELL), 1.25-μm InGaAs single quantum well (SQW), and 1.55-μm GaInNAsSb SQW structures grown using elemental source molecular beam epitaxy (MBE) are reported. 5 GHz optical pulses with subpicosecond RMS jitter, high pulse peak power (1W) and narrow pulse width...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2011