Wrinkled stripes localized by cracks in metal films deposited on soft substrates.

نویسندگان

  • Senjiang Yu
  • Xiaofei Zhang
  • Xiaofei Xiao
  • Hong Zhou
  • Miaogen Chen
چکیده

Homogeneous global wrinkling patterns such as labyrinths, herringbones, ripples and straight stripes can be widely observed in natural and artificial systems, but localized wrinkling patterns (not including buckle-driven delaminations, folds, ridges and creases) are seldom observed in experiments. Here we report on the spontaneous formation of highly ordered wrinkled stripes localized by cracks in metal films deposited on soft substrates. The experiment shows that the metal film is under a large tensile stress during deposition, which is relieved by the formation of networked cracks. After deposition, a compressive stress is stored up in the film and it always focuses near the new formed cracks due to the plastic deformation of the film, resulting in the formation of localized wrinkled stripes composed of a large number of straight wrinkles perpendicular to the cracks. The morphological characteristic, formation mechanism and evolution behaviors of the localized wrinkled stripes have been described and discussed in detail.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

How Stretchable Can We Make Thin Metal Films?

Thin metal films deposited on elastomeric substrates can remain electrically conducting at tensile strains up to ~100%. We recently used finite-element simulation to explore the rupture process of a metal film on an elastomer. The simulation predicted the highest stretchability on stiff elastomeric substrates [1]. We now report experiments designed to verify this prediction. A ~15-μm thick sili...

متن کامل

Tribology of bio-inspired nanowrinkled films on ultrasoft substrates

Biomimetic design of new materials uses nature as antetype, learning from billions of years of evolution. This work emphasizes the mechanical and tribological properties of skin, combining both hardness and wear resistance of its surface (the stratum corneum) with high elasticity of the bulk (epidermis, dermis, hypodermis). The key for combination of such opposite properties is wrinkling, being...

متن کامل

The role of substrate pre-stretch in post-wrinkling bifurcations.

When a stiff film on a soft substrate is compressed, the surface of the film forms wrinkles, with tunable wavelengths and amplitudes that enable a variety of applications. As the compressive strain increases, the film undergoes post-wrinkling bifurcations, leading to period doubling and eventually to formation of localized folds or ridges. Here we study the post-wrinkling bifurcations in films ...

متن کامل

Study of Iridium (Ir) Thin Films Deposited on to SiO2 Substrates

Very smooth thin films of iridium have been deposited on super polished fused silica (SiO2) substrates using dc magnetron sputtering in argon plasma. The influence of deposition process parameters on film micro roughness has been investigated. In addition, film optical constants have been determined using variable angle spectroscopic ellipsometery, over the spectra range from vacuum ultraviolet...

متن کامل

Formation of Cupric Oxide Films on Quartz Substrates by Annealing the Copper Films

In the present work, cupric oxide (CuO) films were obtained through thermal annealing of the copper (Cu) films deposited on quartz substrates by DC magnetron sputtering method. The annealing was performed in air atmosphere for different times ranging from 60-240 min at temperature of 400 ºC. The influence of annealing times on structural and morphological properties of the films was investi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Soft matter

دوره 11 11  شماره 

صفحات  -

تاریخ انتشار 2015