Different Damaged Shaft Lining Concrete Resistance to Sulfate Corrosion
نویسندگان
چکیده
Shaft lining concrete itself has a certain degree of initial damage before being corroded by sulfate. In order to study the resistance of the concrete of the initial damage in different corrosion solution concentration of sulfate, samples of concrete without initial damage, loaded 50% ultimate load and loaded 70% ultimate load with initial damage concrete were selected and studied their corrosion resistance in 9%, 12% and 15% concentrations of sulfate solution. The results show that compared with concrete with no initial damage, the concrete with initial damage resistance to sulfate corrosion is varied. With the increased concentration of the corrosion solution, the concrete with worse initial damage exhibited much lower resistance to sulfate corrosion.
منابع مشابه
Durability of Self-compacting Lightweight Aggregate Concretes (LWSCC) as Repair Overlays
For rehabilitation of damaged concrete structures, the durability of repair overlay is a very important issue. Self-compacting concretes (SCC) are known as a suitable repair overlay materials. In this study, the durability of different self-compacting lightweight aggregate concretes (LWSCC) and effect of lightweight aggregate type on them is investigated. 3 mix designs of LWSCC containing three...
متن کاملارزیابی خصوصیات مکانیکی کانالهای انتقال آب ساخته شده از بتن حاوی نانوپوزولان خاکستر غلاف گندم
Channel lining is essential to increase resistance against scour, reducing water losses and as a result increase water conveyance efficiency. Since the canal lining has significant costs, selection of type of lining must be made with great care and with considering engineering properties. One of the conventional lining for water conveyance cannel is concrete lining. Because of advantages of con...
متن کاملThe Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan
Many parameters are influenced by the diffusion of chloride on concrete in marine environments and these can affect concrete quality. In this study, the effect of water to cement ratio of 0.35, 0.40 and 0.45 on corrosion resistance and compressive strength of reinforced concrete was evaluated. Moreover, different percentages of micro silica (SiO2) including 5, 7.5 and 10% were utilized, in orde...
متن کاملTesting Silica Fume-Based Concrete Composites under Chemical and Microbiological Sulfate Attacks
Current design practices based on descriptive approaches to concrete specification may not be appropriate for the management of aggressive environments. In this study, the durability of cement-based materials with and without the addition of silica fume, subjected to conditions that leach calcium and silicon, were investigated. Chemical corrosion was simulated by employing various H₂SO₄ and MgS...
متن کاملCorrelation Analysis between Different Types of Corrosion of Concrete Containing Sulfate Resisting Cement
Utilization of pozzolanic materials (fly ash, slag, zeolite, metakaolin, microsilica and more) in the manufacturing of cement and concrete has increased considerably over the last decades. Another option is to use concrete containing sulfate resisting cement. This could help minimize the harmful impacts on concrete exposed to an aggressive environment. The issue of the deteriorative impact of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015