A model for universal time scale of vortex ring formation

نویسندگان

  • Kamran Mohseni
  • Morteza Gharib
چکیده

An analytical model for predicting the universal time scale for formation of vortex rings generated through impulsively started jets is considered. The model is based on two assumptions, namely the validity of the slug model in simulating the discharge process of the fluid out of the cylinder and the approximation of the vortex at the pinch off moment by a vortex in the Norbury family. The nondimensional stroke length L/D ~referred to as ‘‘formation number,’’ following Gharib et al. @J. Fluid Mech. 360, 121 ~1998!#! predicted by the model satisfactorily matches the experimental observation of Gharib et al. The model introduces two nondimensional parameters that govern the limiting formation number: nondimensional energy End and circulation Gnd . The predicted value of End matches very well with the experimental data. It is also predicted that there is a limiting value for the nondimensional circulation in the range 1.77&Gnd&2.07. © 1998 American Institute of Physics. @S1070-6631~98!00810-1#

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of time-dependent piston velocity program on vortex ring formation in a piston/cylinder arrangement

An analytical model describing laminar vortex ring formation in a nozzle flow generator piston/ cylinder arrangement proposed previously by the authors is extended to time-dependent velocity programs. The predictions of the model are in good agreement with the available numerical data for impulsive, linear, and trapezoidal velocity programs. We also show that properly scaled vortex circulation ...

متن کامل

The formation number of vortex rings formed in uniform background co-flow

The formation of vortex rings generated by an impulsively started jet in the presence of uniform background co-flow is studied experimentally to extend previous results. A piston–cylinder mechanism is used to generate the vortex rings and the co-flow is supplied through a transparent shroud surrounding the cylinder. Digital particle image velocimetry (DPIV) is used to measure the development of...

متن کامل

Energy and velocity of a forming vortex ring

It is known that vortex rings formed by large stroke ratios ~in a piston/cylinder arrangement! pinch off from their generating jets at a fairly constant universal time scale. In this paper we show that the hypothesis that at the pinch off the translational velocity of the ring equals the jet flow velocity near the ring is equivalent to the recently proposed idea based on a variational principle...

متن کامل

Numerical experiments on vortex ring formation

Numerical simulations are used to study the formation of vortex rings that are generated by applying a non-conservative force of long duration, simulating experimental vortex ring generation with large stroke ratio. For sufficiently long-duration forces, we investigate the extent to which properties of the leading vortex ring are invariant to the force distribution. The results confirm the exis...

متن کامل

Numerical Investigation of Vortex Interaction in Pipe Flow

To discover the nonlinear characteristics of pipe flow, we simulated the flow as a sum of many vortex rings. As a first step, we investigated the nonlinear interaction among a maximum of three vortex rings. The pipe wall was replaced by many bound vortices. A free vortex ring moves right or left according to the radius, and that of a particular radius keeps the initial position. The energy of a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1998