The master equation approach to configurational kineticsof alloys via the vacancy exchange mechanism: generalrelations and features of microstructural evolution

نویسندگان

  • Kirill D. Belashchenko
  • K D Belashchenko
چکیده

The earlier-suggested generalized Gibbs distribution approach to the configurational kinetics of non-equilibrium alloys is extended to the case of many-component alloys and the realistic vacancy-mediated atomic exchange mechanism is incorporated. Exact and approximate equations for the temporal evolution of atomic distributions as well as for the free energy of a non-equilibrium alloy are presented. It is shown that the evolution of the main alloy component distribution for the nearest-neighbour vacancy exchange model can usually be described in terms of an equivalent direct exchange model. This conclusion is illustrated with the computer simulation of decomposition and ordering via the vacancy exchange mechanism for a twodimensional alloy model. The simulation also reveals the localized ordering phenomenon at very early stages of ordering, in agreement with previous experiments and Monte Carlo simulation, but with no interfacial vacancy trapping which was suggested in previous works in order to explain this phenomenon.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Kinetic features of alloy ordering with many types of ordereddomain: D03-type orderings

The earlier-described master equation approach to the configurational kinetics of nonequilibrium alloys is used to study kinetic features of ‘multivariant’ orderings for which more than two types of ordered domain are possible. To this end we make extensive simulations of various phase transformations involving D03-type orderings for a number of alloy models. The microscopic structure of variou...

متن کامل

Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 Alloy in As-Cast and Extruded Conditions

This research work has been carried out to study the effect of different Ca contents (0.5, 1.0, 1.5, 2.0 and 3.0) on the microstructure and porosity content of ZK60 alloys. The samples were examined by using optical and scanning electron microscopy (SEM) to evaluate the modification efficiency of the alloy with different Ca concentrations. The cast specimens were modified, homogenized and extru...

متن کامل

Investigation of Vacancy Defects on the Young’s Modulus of Carbon Nanotube Reinforced Composites in Axial Direction via a Multiscale Modeling Approach

In this article, the influence of various vacancy defects on the Young’s modulus of carbon nanotube (CNT) - reinforcement polymer composite in the axial direction is investigated via a structural model in ANSYS software. Their high strength can be affected by the presence of defects in the nanotubes used as reinforcements in practical nanocomposites. Molecular structural mechanics (MSM)/finite ...

متن کامل

Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy

Piston aluminum alloys have different intermetallic phases, such as Cu3Al, Mg2Si ,and AlNi phases. The morphology and the distribution of such phases have important roles on mechanical properties of the piston material. Therefore, in this research, various ageing heat treatments on the mentioned material were done and the microstructural feature and the hardness were studi...

متن کامل

Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing

The mechanical properties and microstructural developments of 321 stainless steel during thermomechanical process were investigated. The repetitive cold rolling and subsequent annealing were conducted to achieve nanocrystalline structure in an AISI 321 stainless steel. Heavily cold rolling at −20°C was conducted to form martensite in metastable austenitic steel. The process was followed by anne...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017