An Ultrasonic technology Study for Subsurface Defect in Railway Wheel Tread
نویسندگان
چکیده
The subsurface defect in the wheel tread caused from Rolling Stock Fatigue (RCF) has become more danger in high speed railway. The conventional UT and phased array UT have deficiency to find the subsurface defect from the tread surface because of limitation of ultrasonic near field. In this paper, the subsurface defect is studied by simulation and experimental results with ultrasonic technique. Two typical probes, TR and angle probe are employed and some parameters are optimized. The experiments on real wheel with nature subsurface defect are carried out and the results show that it can compensate for conventional ultrasonic technology to improve the Possibility of detection (POD) in the railway wheel.
منابع مشابه
An Ultrasonic technology Study for the Subsurface Defect in Railway Wheel Tread
The subsurface defect in the wheel tread caused from Rolling Stock Fatigue (RCF) has become more danger in high speed railway. The conventional UT and phased array UT have deficiency to find the subsurface defect from the tread surface because of limitation of ultrasonic near field. In this paper, the subsurface defect is studied by simulation and experimental results with ultrasonic technique....
متن کاملPreliminary results on multi-body dynamic simulation of a new test rig for wheel-rail contact
The ability to perform rolling contact fatigue (RCF) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. In this paper, a multi-body dynamics (MBD) model is proposed, simulating the vibration behaviour of the prescribed rig. The new testing facility is modelled using a three-dimensional model of the vehicl...
متن کاملAutomated System for Magnetic Particle Inspection of Railway Wheels
This paper presents a new developed automated system used for flaw detection and classification on railway wheels. The described system uses the principle of non-destructive method based magnetic particle inspection. Our proposed and finally constructed automated system is used in industrial applications where non-destructive testing of railway wheels is desired. As a part of testing line, it i...
متن کاملApplication of Phased Array Ultrasonic Testing Technology on Inservice Wheel
In this paper, an Ultrasonic testing method for inservice wheel by use of phased array technology is introduced. To meet the ultrasonic test criterion of inservice CRH wheel, groups of phased array probes and conventional probes are combined used. By study echo wave in wheel rim and wheel disk form different probes, defect analyzing methods in wheel rim and wheel disk are studied. Tests on CRH ...
متن کاملStatistical Modelling of Wear and Damage Trajectories of Railway Wheelsets
This paper discusses the use of Linear Mixed Models (LMM) and Generalized Linear Mixed Models (GLMM) to predict the wear and damage trajectories of railway wheelsets for a fleet of modern multiple unit trains. The wear trajectory is described by the evolution of the wheel flange thickness, the flange height and the tread diameter; whereas the damage trajectory is assessed through the probabilit...
متن کامل