Abstracts [Bonding Titan_Zirkon] 32012

Two experimental groups of abutments were prepared: (1) 4.3-mm platform width implant abutment with a 6.5-mm height (control), and (2) a 4.3-mm platform width implant abutment with a 5.5-mm height (shorter). Each abutment had 5 zirconia copings (custom designed) fabricated through a 3-dimensional computer-assisted design (3-D CAD) process by scanning an identical wax pattern. The zirconia copings were designed to have a 6-mm projection above the titanium abutment to accommodate a 2-mm hole. A wire was inserted through this hole to attach the zirconia coping to a universal testing machine. Each abutment was placed onto an implant embedded in a brass base designed to fit onto the universal testing machine. The zirconia copings were cemented onto the abutments with a provisional luting agent (Improv), and a tensile force was applied at a crosshead speed of 0.5 mm/min. The removal force was recorded for each specimen. An unpaired t test was used for the statistical analysis (alpha =.05).