Microphotonic Components for a Mm-wave Receiver
نویسندگان
چکیده
A new microphotonic mm-wave receiver architecture with direct electrical-to-optical conversion is presented. The receiver uses high-Q RF and microphotonic electro-optic resonator components which are operated in simultaneous resonance. Initial results demonstrating modulation of an optical carrier at RF in the mm-wave range are reported .
منابع مشابه
High-q Microphotonic Electro-optic Modulator
A microphotonic mm-wave modulator using simultaneous RF and optical resonance in an electro-optic medium is presented. Theory and simulation of modulator operation is discussed, and experimental results demonstrating modulation using simultaneous resonance in the mm-wave range are reported. Ó 2001 Elsevier Science Ltd. All rights reserved .
متن کاملA Novel MicroPhotonic Structure for Optical Header Recognition
In this paper, we propose and demonstrate a new MicroPhotonic structure for optical packet header recognition based on the integration of an optical cavity, optical components and a photoreceiver array. The structure is inherently immune to optical interference thereby routing an optical header within optical cavities to different photo receiver elements to generate the autocorrelation function...
متن کاملSubmicrometer-wide amorphous and polycrystalline anatase TiO2 waveguides for microphotonic devices.
We demonstrate amorphous and polycrystalline anatase TiO(2) thin films and submicrometer-wide waveguides with promising optical properties for microphotonic devices. We deposit both amorphous and polycrystalline anatase TiO(2) using reactive sputtering and define waveguides using electron-beam lithography and reactive ion etching. For the amorphous TiO(2), we obtain propagation losses of 0.12 ±...
متن کاملEvanescent-wave bonding between optical waveguides.
Forces arising from overlap between the guided waves of parallel, microphotonic waveguides are calculated. Both attractive and repulsive forces, determined by the choice of relative input phase, are found. Using realistic parameters for a silicon-on-insulator material system, we estimate that the forces are large enough to cause observable displacements. Our results illustrate the potential for...
متن کاملTypical Ka band Satellite Beacon Receiver Design for Propagation Experimentation
This paper presents the design and simulation of a typical Ka band satellite beacon receiver for propagation experimentation. Using satellite beacon signal as a reference signal in satellite wave propagation study, is one of the most important methods. Satellite beacons are frequently available for pointing large antennas, but such signals can be used for measuring the effect of natural phenome...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001