Optimum Design of Dynamically-Loaded Journal Bearing with R600a Refrigerant Application

نویسندگان

  • K. H. Lee
  • J. W. Kim
  • Y. J. Huh
  • J. Lee
  • Janghee Lee
چکیده

Present study is undertaken to optimize the lubrication reliability and frictional loss of the dynamically-loaded jownal bearing with R600a refrigerant application. A mathematical model is developed for analyzing the dynamics of the journal bearing system with the mobility method. It takes into account the effects of the refrigerant species, aspect ratio, clearance ratio and surface roughness. A corresponding computer program is described which enables to obtain the minllnum film thickness and frictional loss. Design optimization is graphically performed by parametric studies of the aspect ratio and clearance ratio. C bearing clearance e: eccentricity velocity L: bearing length NOMENCLATURE D: bearing diameter F. bearing force M: journal mobility e: eccentricity h min: minimum film thickness R: bearing radius Rq: rms surface roughness p: lubricant viscosity e: eccentricity ratio m: mean angular velocity .Am: relative angular velocity INTRODUCTION The recent development in alternative refrigerant compressor has made clear the demand for the optimum design of the bearing system The optimization problem of bearing system makes compromise technique between the lubrication reliability and frictional loss desirable. In this work, the dynamics of journal bearing is therefore calculated by the mobility method considering the efficiency of optimization process. In a design example, the connecting-rod journal bearing at a reciprocating compressor with the swept volume 8.7 cm is presented. We refers simulation results of the same compressor for the cylinder pressure datum with refrigerant. The minimum film thickness and the frictional loss as performance parameter are successively studied with design parameter such as -the aspect ratio, clearance ratio, surface roughness and refrigerant species. Design optimization is graphically perlormed by parametric studies of the bearing aspect ratio and clearance ratio. MOBILITY METHOD The Basic Idea of The Mobility Method

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Analysis of Alternative Refrigerant as Replacement of Hfc134a

An experimental performance study on VCR system with 100g R600a/R290 refrigerant mixture and 100g R600a (pure isobutene) as drop in replacement of R134a was conducted . continuation running tests were performed under different length of capillary for R600a/R290 & R600a. The result showed that the hydrocarbon mixture (R600a/R290) had highest COP at L=10 feet length capillary by17.35% -23.5% for ...

متن کامل

Comparative Performance of Hydrocarbon Refrigerants

Measurements on R600a refrigerators have shown electricity savings over R134a and R12 up to 20%. We propose new parameters which are functions of well known refrigerant properties. These parameters show that R600a has half the leakage, pressure loss and condenser pressure and double the heat transfer coefficient of R12 and R134a explaining the measurements. Use of R600a in small heat pumps and ...

متن کامل

Docetaxel loaded PEG-PLGA nanoparticles: optimized drug loading, in vitro cytotoxicity and in vivo antitumor effect

In this study a 3-factor, 3-level Box-Behnken design was used to prepare optimized docetaxel (DTX) loaded pegylated poly lactide-co-glycolide (PEG-PLGA) NPs with polymer concentration (X1), drug concentration (X2) and ratio of the organic to aqueous solvent (X3) as the independent variables and particle size (Y1), poly dispersity index (PDI) (Y2) and drug loading (Y3) as the responses. The cyto...

متن کامل

Docetaxel loaded PEG-PLGA nanoparticles: optimized drug loading, in vitro cytotoxicity and in vivo antitumor effect

In this study a 3-factor, 3-level Box-Behnken design was used to prepare optimized docetaxel (DTX) loaded pegylated poly lactide-co-glycolide (PEG-PLGA) NPs with polymer concentration (X1), drug concentration (X2) and ratio of the organic to aqueous solvent (X3) as the independent variables and particle size (Y1), poly dispersity index (PDI) (Y2) and drug loading (Y3) as the responses. The cyto...

متن کامل

Heat transfer enhancement in domestic refrigerator using R600a/mineral oil/nano-Al2O3 as working fluid

f liquid g gas ABSTRACT The experimental apparatus was build according to the national standards of India.. The performance of the refrigeration system depends upon the heat transfer capacity of the refrigerant. Normally R12, R22, R600, R600a and 134a are used as a refrigerant. This refrigerant heat transfer capacity is not so good and increase power consumption. Due to these limitation nanoflu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014