An Experimental Study on Behavior of Transverse Connection Appropriate for Modular Girder Bridge
نویسنده
چکیده
This study is to evaluate the behavior of integral and segmental specimens through static and cyclic tests. Integral specimens were made with the same size to be compared with segmental specimens that were made by connected precast members. To evaluate its bending performance and serviceability, 1 integral and 3 segmental specimens were tested under static load. And 1 integral and 2 segmental specimens were tested under cyclic load, respectively. Different load ranges were considered in the cyclic tests to evaluate the safety and serviceability. The test results showed that under static loading, segmental specimens had about 94% of the integral specimen's maximum moment, averagely. Under cyclic loading, the segmental specimens showed that had enough safety in the range of higher than service load and enough serviceability. In conclusion, the maximum crack width (0.16mm) satisfied the allowable crack width (0.30mm) in the range of service load. Keywords—Modular bridge, Transverse connection, Precast concrete, Static and cyclic test.
منابع مشابه
Analytical Study on the Shape of T-type Girder Modular Bridge Connection by Using Parameter
Recently, to cope with the rapidly changing construction trend with aging infrastructures, modular bridge technology has been studied actively. Modular bridge is easily constructed by assembling standardized precast structure members in the field. It will be possible to construct rapidly and reduce construction cost efficiently. However, the shape of the transverse connection of T-type girder n...
متن کاملDesign Requirements for Plate Girders with Bolted Transverse Stiffeners (TECHNICAL NOTE)
Web of plate girders in bridges are usually reinforced by welded transverse stiffeners inorder to improve their shear capacity. Due to problems associated with field welding and fatigue,welded stiffeners are not suitable for retrofitting existing bridges. Bolted stiffeners are a practicalalternative for strengthening girders that are expected to experience shear stresses in excess of theirdesig...
متن کاملDesign Requirements for Plate Girders with Bolted Transverse Stiffeners
The web of plate girders in bridges are usually reinforced by welded transverse stiffeners in order to improve their shear capacity.Due to problems associated with field welding and fatigue, welded stiffeners are not suitable for retrofitting existing bridges. Bolted stiffeners are a practical alternative for strengthening girders that are expected to experience shear stress in excess of their ...
متن کاملDamage detection of multi-girder bridge superstructure based on the modal strain approaches
The research described in this paper focuses on the application of modal strain techniques on a multi-girder bridge superstructure with the objectives of identifying the presence of damage and detecting false damage diagnosis for such structures. The case study is a one-third scale model of a slab-on-girder composite bridge superstructure, comprised of a steel-free concrete deck with FRP rebars...
متن کاملOptimization of Precast Prestressed Concrete Bridge Girder Systems
60 A practical approach to the optimal design of precast, prestressed concrete highway bridge girder systems is presented. The approach aims at standardizing the optimal design of bridge systems, as opposed to standardizing girder sections. Structural system optimization is shown to be more relevant than conventional girder optimization for an arbitrarily chosen structural system. Bridge system...
متن کامل