One-step synthesis of PbSe-ZnSe composite thin film

The Effect of pH on the Optical Band Gap of PbSe Thin Film with Usability in the Quantum Dot Solar Cell and Photocatalytic Activity

This study was an attempt to provide a simple solution processed synthesis route for Lead Selenide (PbSe) nanostructure thin films using the chemical bath deposition (CBD) method which is commercially available in inexpensive precursors. In the CBD method, the preparation parameters play a considerable role and determine the nature of the final product formed. Known as two main factors, the eff...

One-Step Physical Synthesis of Composite Thin Film

Controlled synthesis of PbSe nanotubes by solvothermal transformation from selenium nanotubes.

PbSe nanotubes were successfully synthesized by a reactive template approach via solvothermal transformation of trigonal selenium (t-Se) nanotubes in ethylene glycol. It was revealed that a relatively high reaction temperature (e.g., 200 degrees C), adequate ascorbic acid, and proper lead source were crucial for preparing PbSe nanotubes through shape-preserved transformation of t-Se nanotubes. ...

Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films

The molecular dynamic technique was used to simulate the nano-indentation test on the thin films of silver, titanium, aluminum and copper which were coated on the silicone substrate. The mechanical properties of the selected thin films were studied in terms of the temperature. The temperature was changed from 193 K to 793 K with an increment of 100 K. To investigate the effect of temperature on...

Preparation of Novel Thin-Film Composite Nanofiltration Membranes for Separation of Amoxicillin

Several novel composite membranes were prepared to separate and recycle amoxicillin from pharmaceutical wastewater via nanofiltration process. The synthesis of these membranes included three stages: 1- preparation of polysulfone ultrafiltration membranes as a support via phase separation process, 2- modification of its surface by interfacial polymerization as a selective layer (polyamide), and ...