Study on Imitating Grinding of Two-Dimensional Ultrasonic Vibration Turning System
نویسندگان
چکیده
According to turning instead of grinding process requirements and traditional working principle of ultrasonic vibration turning, a new idea of imitating grinding of two-dimensional ultrasonic vibration turning is brought firstly, and the mechanism of two-dimens ional ultrasonic vibration turning is elaborated. Based on the MATLAB software, grinding trajectory simulation and honing trajectory simulation are carried out. Moreover, the design of ultrasonic transducer and ultrasonic horn is completed. Finally, the required mode shapes and resonance frequency are obtained by using the finite-element method, the results prove that the theoretical analysis is correct.
منابع مشابه
Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملUltrasonic assisted creep feed grinding of Inconel 718
The paper details the effects of depth of cut and vibration amplitude when ultrasonic assisted (US) creep feed grinding Inconel 718 with an open structured alumina based wheel. The workpiece was actuated at a constant frequency (~20.5kHz) via a block sonotrode attached to a 1kW piezoelectric transducer-generator system. A full factorial experimental array comprising 12 tests was conducted invol...
متن کاملUltrasonic assisted creep feed grinding of Inconel
The paper details the effects of depth of cut and vibration amplitude when ultrasonic assisted (US) creep feed grinding Inconel 718 with an open structured alumina based wheel. The workpiece was actuated at a constant frequency (~20.5kHz) via a block sonotrode attached to a 1kW piezoelectric transducer-generator system. A full factorial experimental array comprising 12 tests was conducted invol...
متن کاملUnderstanding of Ultrasonic Assisted Machining with Diamond Grinding Tool
In this work, machining test was carried out in various machining conditions using ultrasonic vibration capable CNC machine. For work material, alumina ceramic (Al2O3) was used while for tool material diamond electroplated grinding wheel was used. To evaluate ultrasonic vibration effect, grinding test was performed with and without ultrasonic vibration in same machining condition. In ultrasonic...
متن کامل