Measuring heat transfer during spray cooling using controlled induction-heating experiments and computational models
نویسندگان
چکیده
Article history: Received 9 October 2011 Received in revised form 14 July 2012 Accepted 20 July 2012 Available online 16 August 2012
منابع مشابه
Radial Heat Transfer Dynamics during Cryogen Spray Cooling
Cryogen spray cooling (CSC) is a heat extraction process that protects the epidermal layer during skin laser surgery of port wine stain (PWS) birthmarks and other specific dermatoses. The objective of the present work is to investigate temporal and radial variations on the heat transferred at the surface of a skin model during CSC. A fast-response thermal sensor is used to measure temperature a...
متن کاملHeat-transfer dynamics during cryogen spray cooling of substrate at different initial temperatures.
Cryogen spray cooling (CSC) is used to minimize the risk of epidermal damage during laser dermatologic therapy. However, the dominant mechanisms of heat transfer during the transient cooling process are incompletely understood. The objective of this study is to elucidate the physics of CSC by measuring the effect of initial substrate temperature (T0) on cooling dynamics. Cryogen was delivered b...
متن کاملHeat transfer between single cryogen droplet and epoxy skin phantom
Cryogen Spray Cooling (CSC) is an auxiliary procedure that pre-cools the epidermis during Laser Dermatologic Surgery (LDS) to avoid non-specific epidermal thermal damage. During CSC, explosive atomization, inflight evaporation and droplet-substrate interaction affect heat extraction from the substrate. In order to understand the heat transfer mechanism of this complex process, we first study th...
متن کاملImpact Modeling of Thermally Sprayed Polymer Particles
Thermal spray has traditionally been used for depositing metallic, carbide and ceramic coatings, however, it has recently been found that the high kinetic energy of the High Velocity Oxy-Fuel (HVOF) thermal spray process also enables the solventless processing of high melt viscosity polymers, eliminating the need for harmful, volatile organic solvents. A primarily goal of this work was to devel...
متن کاملFree convection in a 3D chamber with local cooling and heating
This paper modeled heating air of a room through examining free convection in a 3D chamber. The chamber had cold and hot sources with Tc and Th temperatures, respectively. Its other walls were adiabatic. This study aimed at predicting effect of temperature difference, displacement of hot and cold sources and their aspect ratio on flow field, temperature and heat transfer rate. To conduct the st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012