Experimental Analysis of Noise and Vibration for Large Brushless Doubly Fed Machines
نویسندگان
چکیده
In this work, a large-scale Brushless Doubly Fed Machine (BDFM) built in frame size D400 is tested at different operating conditions in order to examine its noise and vibration levels. A series of measurements were conducted on the machine to establish the main modes of excitation of vibration and noise developed by the machine. The harmonic spectrums of the vibration amplitudes are presented at two different rotor speeds at which the vibration level is highest, in order to determine the vibration components frequencies existed in the vibration spectrum. A harmonic analysis of the BDFM is then proposed in order to assess the sources of vibration in the machine.
منابع مشابه
Control Methods for Doubly-Fed Reluctance Machines
The paper considers aspects of scalar V/f control, vector control and direct torque (and flux) control (DTC) of an emerging cost-effective technology for limited speed range applications the brushless doubly fed reluctance machine (BDFRM). Apart from giving a comprehensive review of the various control methods, its major contribution is the presentation and experimental verification of a sensor...
متن کاملNeuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator
The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surfa...
متن کاملAn Improved Three-level Direct Torque Control Method of Brushless Doubly-fed Machine Based on the Fixed Synthesizing Vector
Article history: Received: 11. 09. 2013. Received in revised form: 17.10.2013. Accepted: 17.10.2013. With the rapid growth of an AC adjusted speed system application, it is necessary to control and reduce harmonic pollution since the problem brought about by the device of power electronics not only blocks the development of power electronics technology, but also causes severe harm in an electri...
متن کاملParameter and Performance Comparison of Doubly Fed Brushless Machine With Cage and Reluctance Rotors
The cage and reluctance rotors are two major types of rotor structures used in the doubly fed brushless machine (DFBM). In order to study comparatively the effects of different rotor structure on the DFBM, a prototype machine has been specially designed and built. The experimental parameter and performance comparisons between the axially laminated anisotropic (ALA) and cage-rotor machines are p...
متن کاملEquivalent circuit for the brushless doubly fed machine (BDFM) including parameter estimation and experimental verification
Experimental results from a frame size 180 brushless doubly fed (induction) machine (BDFM) fitted with four rotor designs are presented. The machine is intended for use as a variable speed generator, or drive. A per phase equivalent circuit for the machine has been developed and a method of obtaining parameters for the circuit is described. Expressions for the torque as a function of speed have...
متن کامل