Practical Broadband Microstrip Filter Design and Implementation Method
نویسندگان
چکیده
Broadband microstrip filter operating within 1.5GHz bandwidth at UHF range for RF communication systems has been designed, simulated, and implemented using a practical network parameter method. The design has been performed using the network parameter method with ABCD parameters, which simplified the analysis significantly. The analytical, simulated and measured results have been compared and excellent agreement is observed. It has been shown that the network parameter method such as the one presented in this paper can be used to design and implement broadband microstrip filters with high accuracy.
منابع مشابه
Broadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملAnalysis of multi-conductor coupled microstrip lines with an aperture in the ground plane for the design of a broadband filter
Analysis of multi-conductor coupled microstrip lines with an aperture in the ground plane for the design of a broadband filter D. Packiaraj a , K.J. Vinoy b , M. Ramesh a & A.T. Kalghatgi a a Central Research Laboratory, Bharat Electronics Limited, Bangalore, 560013, India b Department of Electrical Communication Engineering, Indian Institute of Science, Bangalore, 560012, India Version of reco...
متن کاملThe Design and Implementation of Beidou Satellite Navigation System RF Front-End Filter
In the RF(Radio Frequency) front-end of Beidou navigation system, the high precision filter which filtering some noise of receiving signal plays an important role for the whole system. The designed Filter in this paper is based on the theory foundation of parallel coupled microstrip line band-pass filter which combine the designing method of the traditional filter with microwave circuit simulat...
متن کاملMATLAB Solution of microstrip chebyshev Low pass filter system parameters by insertion loss method
We propose the practical solution for overcoming the tedious job of detail calculation and corresponding rigorous analysis of several system parameter values associated with the design, testing and troubleshooting of Microwave Microstrip Chebyshev Lowpass Filter (LPF) by Insertion Loss Method. The entire above spoken Microwave Lowpass filter system modeling and performance analysis are implemen...
متن کاملHigh Selectivity Miniaturized Broadband Filter
Design of a compact broadband filter using tightly coupled line sections in defected (A slot is cut in the ground) microstrip medium operating from 3.1–6.8 GHz has been reported in this article. Filter has been designed and analyzed using an equivalent circuit model based on even and odd mode parameters of coupled line sections. The proposed filter has attenuation poles on either side of the pa...
متن کامل