Static and Dynamic Membrane Structures
نویسنده
چکیده
While originally P systems were defined to contain multiset rewriting rules, it turned out that considering different types of rules may produce important results, such as increasing the computational power of the rules. This paper focuses on factoring out the concept of a membrane structure out of various P system models with the goal of providing useful formalisations. Both static and dynamic membrane structures are considered.
منابع مشابه
Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping
In the current study, the effects of Casimir force and squeeze film damping on pull-in instability and dynamic behavior of electrostatically actuated nano and micro electromechanical systems are investigated separately. Linear elastic membrane theory is used to model the static and dynamic behavior of the system for strip, annular and disk geometries. Squeeze film damping is modeled using nonli...
متن کاملMechanical Properties Analysis of Bilayer Euler-Bernoulli Beams Based on Elasticity Theory
This paper analyzes the effects of structures and loads on the static bending and free vibration problems of bilayer beams. Based on static mechanical equilibrium and energy equilibrium, the static and dynamic governing equations of bilayer beam are established. It is found that the value of the thickness ratio has a significant effect on the static and dynamic responses of the beam, and the st...
متن کاملEvaluation of the SEAOC/UBC97 Provisions for the Tall Base-Isolated Structures
The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...
متن کاملEvaluation of the SEAOC/UBC97 Provisions for the Tall Base-Isolated Structures
The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...
متن کاملDamage Detection in Beam-like Structures using Finite Volume Method
In this paper the damage location in beam like-structure is determined using static and dynamic data obtained using finite volume method. The change of static and dynamic displacement due to damage is used to establish an indicator for determining the damage location. In order to assess the robustness of the proposed method for structural damage detection, three test examples including a static...
متن کاملEvaluation of Performance Levels of Zipper-Braced Frames Using Structural Damage Index
The determination of structural and nonstructural damage under earthquake excitations is usually considered as a key factor in performance-based seismic design (PBSD) methods is In this regard, various damage indices have been developed in recent years to quantitatively estimate structural damage. The aim of this study is to develop a simple method to evaluate performance levels of zipper-brace...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- The Computer Science Journal of Moldova
دوره 20 شماره
صفحات -
تاریخ انتشار 2012