Failure Resistant LLRF Reliability design
ثبت نشده
چکیده
Control system: Dual networks are maintained within the sector to the 8-pack level. Within an 8pack a local network (if needed) is connected to both of the network. Local intelligence at the network connection detects failure of one of the primary networks, and switches to the secondary. The two sector networks use different technologies to reduce susceptibility to specific types of interference.
منابع مشابه
Design and Implementation of a Pulsed Digital Llrf System for the Ral Front End Test Stand
Design, implementation and some practical results of the pulsed digital LLRF system (amplitude, phase and tuning loops) of the RFQ for the RAL (Rutherford Appleton Laboratory) FETS (Front End Test Stand) are presented. The design is based on a fast analog front-end for RF-baseband conversion and a model-based Virtex-4 FPGA unit for signal processing and PI regulation. Complexity of the LLRF tim...
متن کاملLessons learned from positron - electron project low level rf and longitudinal feedback
The Positron-Electron Project II (PEP-II) B Factory collider ended the final phase of operation at nearly twice the design current and 4X the design luminosity. In the ultimate operation state, eight 1.2 MW radiofrequency (rf ) klystrons and 12 accelerating cavities were added beyond the original implementation, and the two storage rings were operating with longitudinal instability growth rates...
متن کاملDeveloping a method for reliability allocation of series-parallel systems by considering common cause failure
Reliability allocation has an essential connection to design for reliability and is an important activity in the product design and development process. In determining the reliability of subsystems or components on the basis of goal reliability, attention must be paid to failure effect, failure information, and improvement opportunities based upon real potentials for reliability improvement. In...
متن کاملDetermination of the Height and Overtopping failure of Reservoir Dams by Using Reliability Analysis (Case Study: Namrood Dam)
Generally, the design of dams and other hydraulic structures is carried out based on deterministic approaches. However, there are many uncertainties in the estimation of different effective parameters in hydraulic structures design. The inherent uncertainties in these parameters necessitate reliability analysis to ensure the structure stability. In this study, after investigating various uncert...
متن کاملTHE OPTIMIZATION OF LARGE-SCALE DOME TRUSSES ON THE BASIS OF THE PROBABILITY OF FAILURE
Metaheuristic algorithms are preferred by the many researchers to reach the reliability based design optimization (RBDO) of truss structures. The cross-sectional area of the elements of a truss is considered as design variables for the size optimization under frequency constraints. The design of dome truss structures are optimized based on reliability by a popular metaheuristic optimization tec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999