Method for the evaluation of stretch blow molding simulations with free blow trials

Finite-Element (FE) simulations are a valuable tool to support the analysis and optimization of production processes. In order to achieve realistic simulation results, a consistent simulation set-up followed by an evaluation through experiments is crucial. Stretch Blow Molding (SBM) is a commonly applied forming method to produce thin walled bottles. Polyethylene terephthalate (PET) preforms are biaxially stretched into a closed cavity to form a bottle. In this process the thermo-mechanical material behavior during forming greatly influences the performance of the end product and consequently plays a key role for a reliable process simulation. To ensure a realistic material representation in the simulation model, an adequate material model is calibrated with stress-strain curves from biaxial tests. Thin PETsheets are stretched under defined temperatures and strain rates. These representative experiments include process simplifications regarding geometry, heating and deformation parameters. Therefore, an evaluation step subsequent to the simulation set-up is inevitable. This paper presents a method for extracting temperature dependent stress-strain-curves from experiments close to the production process which enables the crucial evaluation of a process simulation. In the SBM process, the wall thickness distribution of the bottle refers to the preform deformation over time but does not fully define the thermo-mechanical material behavior. In the presented method, PET-preforms receive thermal treatment with Infrared (IR)heaters from an SBM-machine and are subsequently inflated into free air (free-blow-trial). An IR-camera is used to obtain the temperature distribution on the preform immediately before blowing. Two high speed cameras are synchronized with a pressure sensor to consequently calculate reliable stress-strain curves at any point on the preform surface. These data is finally compared to results from FE-simulations of the free blow trials.