An Efficient BIST (Built-in Self-test) for A/D converters
نویسندگان
چکیده
Abstract A histogram-based built-in self-test (BIST) approach for deriving main characteristic parameters of an analog to digital converter (ADC) such as offset, gain and non-linearities is proposed. The BIST uses a ramp signal as an input signal and two counters as a response analyzer to calculate the derived static parameters. Experimental results show that the proposed method makes the hardware overhead and testing time reduced while detecting any static faults in an ADC.
منابع مشابه
Efficient BIST scheme for A/D converters
As SOC and complex systems usually include analogue IPs, it becomes more important to test analogue devices efficiently. The reason for this is that analogue testing for high quality requires substantial testing costs although the analogue portion in a whole chip or in a system is usually very small. In the paper, an efficient low-cost built-in self-test (BIST) scheme is developed for testing A...
متن کاملA BIST Structure for IP Multi-Slope A/D Converter Testing
This paper proposes a static test approach suitable for built-in-self-test (BIST) of Analog-to-digital converter Intellectual Property (IP). Static parameters (INL, DNL, gain, offset) are tested without using test equipment. The proposed BIST structure is applicable for testing models of analog-to-digital converters up to 12bits of resolution. Comparison results with dynamic test equipment vali...
متن کاملLow Power March Memory Test Algorithm for Static Random Access Memories (TECHNICAL NOTE)
Memories are most important building blocks in many digital systems. As the Integrated Circuits requirements are growing, the test circuitry must grow as well. There is a need for more efficient test techniques with low power and high speed. Many Memory Built in Self-Test techniques have been proposed to test memories. Compared with combinational and sequential circuits memory testing utilizes ...
متن کاملBuilt-in Self-test for A/D Converters in the Presence of Transient Zones
This paper presents a new BIST(Built-in Selftest) method for A/D converters. The method characterizes the static parameters of A/D converter like offset, gain, INL(Integral Non-linearity) and DNL(Differential Non-linearity). It uses a ramp signal as a test stimulus and consists of three detectors – a transition detector, an INL detector and a DNL detector. The transition detector checks the cod...
متن کاملA Low-Cost BIST Based on Histogram Testing for Analog to Digital Converters
In this letter a histogram-based BIST (Built-In Self-Test) approach for deriving the main characteristic parameters of an ADC (Analog to Digital Converter) such as offset, gain and non-linearities is proposed. The BIST uses a ramp signal as an input signal and two counters as a response analyzer to calculate the derived static parameters. Experimental results show that the proposed method reduc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007